Teknoflow Super Plasticizer, 30 kg(Текнофлоу Супер)

• The ideal application temperature of the material is from + 5°C to +35 °C in the morning and evening.
• Before applying the material, the surface should be moistened
• It is necessary to add a plasticizer in a ratio of 0.5-2 % to the total volume of the cement mixture and mix until a homogeneous compound is obtained.

Notes:

• If the concrete is poured at low temperatures, it is necessary to protect the surface from freezing.
• Immediately after filling the material, it is necessary to protect the surface from adverse weather conditions (direct sunlight, high temperatures < +35 °C, precipitation and frost).
• The work should be carried out in compliance with safety and hygiene standards, using a mask and glasses.
• The tools and equipment used must be washed immediately after use.

1. What can be added to concrete for strength?

To give strength to the concrete mixture, a liquid superplasticizer can be added in a ratio of 0.5-2% to the total mass of the mixture. Teknoflow Super made by Tekno is considered a good material.

2. What is the plasticizer used for in concrete?

The plasticizer is added to the concrete mix to harden the concrete, increase the plasticity and fluidity of the mixture, as well as to prevent the formation of voids.

3. What can replace the plasticizer for concrete?

Very often, more water is added to increase the plasticity of the concrete mixture, but this reduces the strength of the concrete. It is best to add a special mixture - Teknoflow Super plasticizer, which will not only increase the fluidity of concrete, but also increase its strength and durability.

4. What should be added to the solution so that it does not crack?

Before pouring the concrete mixture, a plasticizer can be added in a ratio of 0.5-2% to the mass of the mixture. This will reduce the amount of water, which will increase the strength and durability of concrete, as well as prevent the formation of cracks.

5. What is a plasticizer?

Plasticizer is an additive in concrete that is used to improve the fluidity and strength of concrete, as well as to reduce the amount of water when mixing materials. Before pouring the concrete mixture, moisten the surface, add the material in a ratio of 0.5-2% to the total mass of the mixture and mix until smooth.

6. What is the plasticizer in the screed for?

Pouring a concrete screed with the addition of a plasticizer prevents the formation of voids and cracks as a result of shrinkage and loss of water from concrete.

7. How to use the plasticizer correctly?

Special preparation for the use of plasticizer is not required. Before pouring the concrete mixture, it is necessary to moisten the surface. Add the plasticizer to the concrete mixture and mix until smooth. 

8. What are fillers and plasticizers?

Fillers and plasticizers are special additives for concrete that perform a number of necessary functions: strengthening concrete, giving water resistance to concrete, increasing wear resistance to concrete, giving plasticity and elasticity to the concrete mixture.