Waterproofing a pool is an important construction step that ensures its longevity and prevents potential water problems. There are different types of waterproofing materials for swimming pools, such as epoxy coatings, polyurethane films, rubber membranes and others. The choice of material depends on the type of pool, budget and other factors. In our article we would like to talk about the liquid UV-resistant waterproofing Teknomer 200 Ex W.
Benefits of pool waterproofing with Teknomer 200 Ex W
First of all, it is necessary to say that the concrete pool is protected by Teknomer 200 Ex W from positive water pressure. After all, the water in the pool presses on its walls from the inside.
It is also impossible not to mention the quality and durability of the material, because if the work is done correctly, the pool will be protected for decades from possible leaks, exposure to salts, solar radiation, etc.
Other significant benefits of pool waterproofing with Teknomer 200 Ex W include the following:
Important stages of pool waterproofing
It is best to waterproof the pool during the construction phase to immediately prevent the destruction of concrete due to moisture and repair work. The material is applied to a clean, flat surface in 2 layers with a brush or spray. The pot life of the mixture after mixing is 70 minutes, and the 2nd layer can be applied 5-6 hours after the first. Commissioning takes from 3 to 7 days, during which it is necessary to provide protection from sunlight and precipitation.
All seams must be taped with Teknomer Pah Bandi 120/70 tape for better sealing of the joints.
When the waterproofing material is completely dry, you can begin filling the pool bowl with water.
For additional information and the correct selection of material, call: +38 (067) 486 42 41
Insulating elastomeric tape with polyester mesh for sealing construction joints
Two-component elastic waterproofing material with high protection from UV rays.