Ultraviolet resistant waterproofing

The use of UV-resistant waterproofing is especially important for external structures exposed to sunlight, such as roofs, terraces, balconies, swimming pools, etc. We will tell you how to choose such a material in our article.
How to choose waterproofing resistant to UV radiation?
A correctly selected waterproofing material resistant to UV radiation provides reliable protection for the entire structure for a long time. To do this, you need to pay attention to the following points:

  1. Type of material. There are different types of waterproofing materials resistant to UV radiation. These can be rubber membranes, polyurethane films, epoxy or acrylic coatings and bitumen mastics.
  2. Type of water pressure from which the surface must be protected.
  3. Type of surface and type of structure on which the waterproofing material must be used, resistant to UV radiation.
  4. Resistance indicators.
  5. Adhesion characteristics.
  6. Water resistance characteristics.

Heat resistance indicators.

Which UV-resistant material to choose?
The best choice of ultraviolet material is liquid acrylic waterproofing Teknomer 200 Ex W. It has a high degree of protection against UV radiation, can be used both indoors and outdoors and has a wide range of applications: from small balconies to shopping malls or water tanks.
The material is also elastic, which is a big advantage when shrinking reinforced concrete structures or other minor movements. Suitable for application to concrete surfaces and fresh screeds.
Like most other waterproofing materials, Teknomer 200 Ex W is recommended to be used in combination with a special sealing tape Teknomer Pah Bandi 120/70 for seams and joints.

Tape for sealing joints Teknomer Pah Bandi

Insulating elastomeric tape with polyester mesh for sealing construction joints

Waterproofing material Teknomer 200 EX W

Two-component elastic waterproofing material with high protection from UV rays.