In most modern repairs in bathrooms and bathrooms, it is customary to use ceramic tiles as a facing material, as well as similar materials - mosaics, artificial stones, etc. Not only the aesthetic aspect, but also the functionality of the entire room will depend on how well and firmly the decorative tiles are laid. Today we will tell you about the high-quality adhesive for Teknofay C1T tiles, its advantages and method of use.
What are the advantages of Teknofay C1T tile adhesive
The one-component composition of Teknofay C1T is a cement-based substance with high adhesion. The mixture is easy to apply, does not slip off vertical surfaces, which greatly simplifies the work process. Other advantages of Teknofay C1T include:
- economical consumption of 3-5 kg of dry mix per 1 m2
- suitable for application on horizontal and vertical surfaces, the mixture does not slide down the wall during the tile laying process, resistance to sliding < 0.5 mm
- it has practically no smell, so the work process will be comfortable
- a high level of adhesion determines the high quality of laying decorative material
- fast solidification: it is possible to rub the seams already 24 hours after using tile glue
- the dried mixture is not sensitive to temperature fluctuations and tolerates temperature differences in the range -40 °C - 80 °C
- the mixture is supplied in dry form in bags of 25 kg, mixed with water in a ratio of 6.8 - 7.2 water / 25 kg of powder
Teknofay C1T tile adhesive is used when laying ceramic tiles of small and medium sizes with a water absorption coefficient of more than 3%.
How to properly glue tiles in the bathroom
To begin with, it is necessary to prepare the surfaces: clean them from dust, oils and any contaminants, as they negatively affect adhesion. The falling off parts of the plaster should be removed, and all irregularities should be leveled with the help of special repair compounds, for example - Teknorep. Before starting work, it is recommended to use a primer, for example Teknolatex 200. It dedusts the surface, which is why it provides excellent adhesion.
How to properly dilute tile glue
To mix the working solution, pour water into a clean container and pour out the dry mixture. Knead with a mixer at low speed for about 4-5 minutes, then leave the material for 5-6 minutes, and then mix again until smooth.
How to apply tile adhesive to the surface?
To apply the adhesive solution, use a flat spatula. After applying the glue, the toothed side of the spatula should be passed over the surface and the tile should be pressed tightly. The tile surface must be in contact with the adhesive by at least 80%. After the glue is applied, you have 15 minutes to lay and level the tile, so it is not recommended to apply the composition immediately on the entire plane. It is better to carry out the work gradually.
