Laying tiles is best trusted to professional craftsmen who will quickly and accurately cope with the task. Masters with experience know how to choose the right adhesive composition and grout for a specific type of tile, know how to prepare the surface and mix the working adhesive composition, as well as where to start laying tiles and how to quickly pick up its pattern if necessary.
If you decide to change the floor tiles yourself or just lay a new one, then in this article we will tell you how to do it correctly.
The stages of laying tiles on the floor
During any repair work, it is not advisable to disrupt the sequence of work.
To lay floor tiles, follow the following steps:
- Selection of materials and their calculation;
- Preparation of the foundation;
- Marking of the floor if necessary (if it is necessary to select a pattern);
- Preparation of adhesive composition;
- Laying of whole tiles;
- Laying of cut tiles;
- Grouting of seams.
As for the installation, it is necessary to start either from the far corner of the room, which we see immediately at the entrance, or from the center of the floor, if the tile has a pattern that needs to be selected.
What materials are needed for laying tiles on the floor?Choosing the right materials is one of the most important steps in laying tiles.
First, it is necessary to choose the decorative facing material itself, and only after selecting glue, grout and other auxiliary compositions for it. For example, by choosing the most common small ceramic 
tile, you can use the standard Teknofay C1T glue, but by choosing a tile, for example, made of granite or marble of large size, you need to purchase a more durable and expensive glue, since the first one will not be able to provide a long service life. In this case, a reinforced elastic adhesive composition is suitable, for example, Teknofay Flex C2TE S1.
In addition to building chemistry materials, you will need:
- Toothed and regular spatula;
- Levels;
- Rubber Hammer;
- Trowel;
- Tile cutting tool.
