In many ways, the speed of the master's work depends on the drying time of the tile adhesive. Therefore, many are interested in how to speed up the process of setting tile glue. If you need to carry out a large amount of work in a short time, then you should select special glue compositions or look for a way out in additives to the mixture.
Stages of the glue drying process
The curing time of the glue can be divided into the following stages:
The first stage. This is the time from how the glue mixture was diluted until it was used on the surface. Here the time can be no more than a few hours.- The second stage. This is the time of primary solidification, when the joints are grouted. In order not to break the masonry, it is necessary to wait at least 12 hours.
- The third stage. This is one of the last stages of solidification, when the glue shrinks. At this time, you can safely wash the tiles, hang lockers, mirrors.
- The fourth stage. A week later, the period of final solidification comes.
On the Internet you can find various tips on additives in glue for faster drying. But remember that then no one can guarantee the quality of styling. If the setting time of the glue is very important to you, we recommend choosing a fast-hardening glue immediately, for example Teknofay Rapid C1FT. With its help, the finishing material will not only be qualitatively and reliably glued, but also commissioning will be possible in 6 hours.
What are the advantages of Teknofay Rapid fast-hardening adhesive?
The glue is highly effective, made on a cement basis. It is used for ceramics, granite, stone. With its help, work is carried out on the surface of concrete, aerated concrete, plaster or drywall.
During the day, the glue freezes completely.
The main advantages include:
- setting speed (up to 6 hours)
- ease of use
- water resistance
It is possible to rub the seams already 4 hours after laying.
What are the features of using a fast-hardening tile adhesive?
Working with a fast-hardening tile adhesive does not differ in any way from laying finishing materials on any other adhesive composition for tiles. The work is best done at a temperature of 5 - 30 degrees above zero. If, after all, the temperature regime is violated, then after work use a thermal insulation material, which you just need to cover the tile with. After applying the mixture, it is necessary to protect the work surface from adverse weather conditions: sun, wind, heat, rain or frost.
