During the repair, a huge number of questions arise. And some of them are related to the selection of material. When it comes to flooring, in general, there are many options: carpet, linoleum, parquet, tiles, etc. But when it comes to a warm field, the number of options shrinking. Underfloor heating is most often installed in the bathroom and kitchen. Choosing a floor covering, many doubt between tiles and granite. And in order to make the right choice, it is worth carefully studying the disadvantages and advantages of each of them.
What is better for underfloor heating tile or porcelain tile?
In fact, porcelain stoneware and tiles are very similar materials. Both of these coatings are made of clay, are reinforced under the influence of high temperature and are sufficiently wear-resistant. However, there are several fundamental differences between them:
- Different types of clay are used in the production of tiles and porcelain stoneware. In addition, granite is baked under the influence of higher temperatures.
- The drawing on the tile is carried out only on the surface, while on porcelain stoneware it passes through the entire structure.
- Porcelain stoneware is subject to mandatory certification.
In fact, it is difficult to say unequivocally which is better: granite or tile. The choice of material depends on a number of factors: room, passability, total area, etc.
How to properly lay porcelain stoneware on a warm floor?
Choosing porcelain stoneware as a floor covering, it is very important not only to choose a high-quality material, but also to lay it correctly.
The process of laying porcelain stoneware on both warm and ordinary floors is generally similar and consists of the following stages:
Surface preparation. Removal of impurities.- Applying glue to the tile and floor with a special toothed spatula.
- Laying granite on the floor according to the marking.
- Alignment using a special level.
- Installation of crosses between tiles to form seams. (You can also use a floor leveling system).
- Removal of glue residues.
But when it comes to laying porcelain stoneware on a warm floor, it is very important to follow a few rules:
- the heating circuit must be securely fixed
- it is forbidden to turn on the system until the glue is completely dry.
In addition, it is important to use a special glue that is resistant to temperature changes. An excellent option is an adhesive solution with high adhesion Teknofay EX C2TE. It is used not only for work with granite, but also for ceramics, marble, porcelain, etc.
Important! When laying porcelain stoneware on a warm floor, the thickness of the adhesive should not exceed 10 mm. This will avoid the concentration of heat exclusively at the pipes.
As for the glue itself, it is quite simple to work with it. The main thing is to strictly follow the instructions.
The advantages of Teknofay EX C2TE adhesive solution include:
- high adhesive properties
- easy to use
- water resistance.
The use of high-quality glue will ensure reliable fixation of porcelain stoneware on a warm floor. And this, in turn, will contribute to a long service life of the floor covering.
