When it comes to floors in industrial premises, the main thing is durability. The ability to withstand heavy loads and resistance to aggressive environments and other factors is also important. That is why a self-leveling floor is considered the most reliable option for such premises.
And this is due to a number of advantages of such a floor covering:
- high abrasion resistance
- resistance to loads
- durability
- solvent resistance
- dielectric properties
In addition, the self-leveling floor is very easy to clean, and it can be done in any color scheme. Therefore, such a coating is perfect for both large industrial warehouses and other premises. However, it is extremely important to choose high-quality materials. Only in this case the most successful result can be achieved.
Which material is better for a self-leveling floor?
Only proven and high-quality mixtures can provide a good and reliable result. An excellent option is a one–component self-leveling mixture for self-leveling floors of industrial strength Teknoself 500. The mixture is composed of synthetic polymers and is characterized by high adhesion.
If we talk about the scope of the mixture, then it can be used:
- as a leveling screed (tiles, marble, granite, parquet and other floor coverings can be laid on such a floor)
- for floors with increased loads (the mixture is perfect for strengthening floors in shops, exhibition and industrial sites, etc.)
- in rooms where it is necessary to use a self-leveling coating.
In this case, the mixture can be used both indoors and for outdoor work. It is important to strictly follow the instructions for use. So, the surface on which the mixture will be applied must be cleaned of all impurities. Poorly cleaned surface reduces adhesion, and as a result, the service life of the floor is reduced.
An important issue that arises when filling the floor is the material consumption. After all, even before the start of work, in most cases, an estimate is made. Accurate calculation of the expense allows you to prevent unnecessary financial costs. And if we talk about the Teknoself 500 mixture, then its consumption is 1.8 kg per 1 square meter of area (provided that a layer of 1 mm is applied). If you consider that the floor layer is 3-30 mm, you will need from 5.4 to 54 kg / m2.
The main characteristics of the mixture:
- self - leveling
- fast drying time (full drying time is 15 hours)
- easy to use
Teknoself 500 has a high compressive strength (≥ 35.0 N/mm2 (TS EN 196-1)), which makes it possible to use it in any industrial room.
In order not to make a mistake in choosing a mixture for a self–leveling floor - choose only a proven manufacturer. A high–quality mixture and compliance with the instructions are the key to a successful result and durability of the coating.
