Parking lots are places with a high intensity of operation, which are subjected to a constant load. Therefore, materials for surfaces, including paint, should be chosen of high quality. Otherwise, they will not last two years.
Therefore, in this article we propose to get acquainted with the parameters that parking paint should have, and also recommend several suitable materials from a trusted manufacturer.
Required paint parameters for parking lots
First of all, the material must be durable and wear-resistant, including abrasion resistance from the constant flow of machines.
Repainting a parking lot can cause quite a lot of worries to the owner, including dissatisfied visitors who will be looking for a place to park the car and tenants who will complain about a sharp drop in the number of visitors in their stores and, as a result, a decrease in the purchase of goods.
It is also important that the colorful material is resistant to daily wet cleaning, without which it is impossible to keep the parking lots of shopping malls and other premises clean with a daily huge flow of people.
In addition, the paint should be a uniform color regardless of the type of surface. Since very often, before the stage of creating markings on surfaces, parking lots are reinforced with special materials, such as varnishes, dry toppings, impregnations or curings. That is why it is important that the paint over the entire surface lies in one shade.
And finally, it is recommended to purchase non-flammable paint for parking lots, since situations in our world can happen differently, so do not neglect precautions.
Material for creating markings in parking lots
Based on the above parameters, we would like to recommend the Teknobond 950 material.
This is a high-quality paint for creating markings on asphalt and concrete roads, as well as parking lots. The material can be applied in both 1 and 2 layers, depending on the operational requirements. When applied in one layer, the material has a density of 150 g/m2.
The paint is quick-drying, so it is very convenient to use it in the construction of any purpose, since the object can be put into operation within 3 hours after application. By the way, the very setting of the material from the surfaces takes place within 10-15 minutes, depending on the temperature, so it is necessary to work with Teknobond 950 paint quickly and clearly.
On some objects, one of the requirements for the paint may be elasticity. Therefore, it is better to use paint from the same series called Teknobond 980.
Both materials have a wide color palette, and you can also create any color from the RAL palette to order.
