Concrete reinforcement is a mandatory stage in the construction of reinforced concrete structures. This ensures their strength and durability. The only problem with fittings is the possibility of rust formation. To avoid this, there are materials designed to protect reinforcement from corrosion. We will talk about one of these in this article.
Material for protecting reinforcement from corrosion
Protecting reinforcement from corrosion is an important part of construction processes. It is done both immediately - during the construction of new reinforced concrete structures, and during their repair or restoration.
Tekno AD corrosion inhibitor is a material designed to prevent the formation of corrosion on fittings. Using this material, you can prevent damage to structures from the inside and reduce its service life.
Advantages of Tekno AD
Among the advantages of Tekno AD corrosion inhibitor are:
- high adhesion to concrete and metal;
- high compressive strength (65 N/mm2);
- frost and water resistance;
- vapor permeability.
How to properly use a corrosion inhibitor?
First you should clean and moisten the surface. Next, you should prepare a working solution by mixing 3.5-4 liters of water and a dry mixture in a clean container and mixing with a special mixer for 5 minutes.
The material is applied in 2 layers, each 1 mm thick, using a brush or automatic sprayer. Tekno AD consumption – 1.6 kg/m2. The material must be applied to the surface within 60–90 minutes after preparing the working solution.
You can read more information about the material on our website.
