Suspension for beams separate 160, reinforced, external type, 19047

The support for the pillars is reinforced with the possibility of adjustment, made of galvanized steel with a thickness of 5 mm, designed for the installation of beams of non-standard sizes. Due to the curly bend of the support, the wooden pole does not contact the surface over which it is attached, which increases the wear resistance of the beam.
The support consists of two separate mirror parts and is installed together, forming a support for a beam of the required width. It is attached to 4 holes with a diameter of 5 mm and 1 hole for adjustment with a diameter of 10 mm and one hole with a diameter of 15 mm.

• Mounting side width (B): 60 mm
• Mounting height (C): 160 mm

Application

• wooden buildings
• wooden terraces
• installation of load-bearing frames
• installation of floor bases and ceilings and roofing systems
• gazebos, wooden canopies

Advantages

• it is attached to both a wooden base and a brick or concrete base.
• for fixing roof beams of different widths and non-standard sizes
• it is fastened with construction nails, universal screws or self-tapping screws for drywall on wood.