Hydrophobizer Teknosil W (Текносил W)

Products > Water-repellent impregnations

Hydrophobizer Teknosil W (Текносил W)

Silane-siloxane water-resistant hydrophobizer for concrete, marble, granite, slate stone

3540
uah
x
liter
=
3540 uah
CHECKOUT

Введите свои данные

Teknosil W is a silane-siloxane water-resistant hydrophobizer for concrete, marble, granite, slate stone.

Scope of application:

  • For external use
  • For working on vertical surfaces
  • For poorly absorbent surfaces such as concrete, marble, granite, slate stone.
  • For absorbent surfaces such as brick, colored briquette, aerated concrete, travertine, limestone.
  • To protect historical artifacts from atmospheric influences.

Properties of water repellent:

  • It has a high penetrating ability
  • Protects the surface from environmental influences without forming a film
  • Protects against alkalis and UV rays
  • Water-based
  • Vapor permeable
  • Increases the strength characteristics of the surface
Colour White
Expiration date 12 months in the closed original packaging
Packaging 10 l bucket
Expenditure 120-200 g/m2
Density 1,0 + 0,1 kg/l
Setting time 45-60 minutes
Thermal stability - 25 °C - + 80 °C
  • Before applying the material, clean the surface from any types of oil, rust, detergents, dirt and other substances that prevent setting.
  • If there are cracks or cavities on the surface – they must be sealed with Teknorep cement compound. Teknosil W should be applied 3-4 days after the cracks are eliminated.
  • Apply Teknosil W on a dry surface using a roller, brush or spray gun for maximum penetration.
  • The second layer should be applied after about 4 hours.
  • When applying the hydrophobizer to very porous surfaces, a third layer should be applied to create maximum protection.

Notes:

  • After application, the surface should be protected from adverse weather conditions, such as direct sunlight, strong wind, high air temperature (more than + 35 °C), rain and frost.
  • The tools and equipment used should be cleaned immediately after use.
  • Do not use the material on PVC and metal surfaces.
  • When working, it is necessary to use work clothes, protective gloves, a mask and glasses. In case of contact with the eyes, immediately rinse the eyes with warm water and consult a doctor.

Product publications

Types of water repellents and assistance in choosing a material
Types of water repellents and assistance in choosing a material

Depending on the chemical nature and mechanism of action, there are several types of water repellents that can be used for various materials and conditions

Read article
Modern technologies of water repellency from concrete surfaces
Modern technologies of water repellency from concrete surfaces

Modern technologies of water repellency from concrete surfaces can be used to protect and preserve concrete structures from the negative effects of moisture, chemicals, salts and other aggressive environments.

Read article
Water repellents for stone
Water repellents for stone

The use of water repellents helps to keep the stone in good condition, reduce the effect of moisture and pollution and increase its duration.

Read article
Hydrophobizers for concrete and brick: types and their features
Hydrophobizers for concrete and brick: types and their features

Hydrophilicity is the cause of the destruction of many building materials, including concrete and bricks. That is why it is recommended to cover such materials with special compounds that will repel water, protecting them from destruction.

Read article
Hydrophobizer Teknosil W

Other products