Hydrophobizer Teknosil W (Текносил W)

Colour	White
Expiration date	12 months in the closed original packaging
Packaging	10 l bucket
Expenditure	120-200 g/m2
Density	1,0 + 0,1 kg/l
Setting time	45-60 minutes
Thermal stability	- 25 °C - + 80 °C

• Before applying the material, clean the surface from any types of oil, rust, detergents, dirt and other substances that prevent setting.
• If there are cracks or cavities on the surface – they must be sealed with Teknorep cement compound. Teknosil W should be applied 3-4 days after the cracks are eliminated.
• Apply Teknosil W on a dry surface using a roller, brush or spray gun for maximum penetration.
• The second layer should be applied after about 4 hours.
• When applying the hydrophobizer to very porous surfaces, a third layer should be applied to create maximum protection.

Notes:

• After application, the surface should be protected from adverse weather conditions, such as direct sunlight, strong wind, high air temperature (more than + 35 °C), rain and frost.
• The tools and equipment used should be cleaned immediately after use.
• Do not use the material on PVC and metal surfaces.
• When working, it is necessary to use work clothes, protective gloves, a mask and glasses. In case of contact with the eyes, immediately rinse the eyes with warm water and consult a doctor.