Decorative plaster Granito Wall (White)(Гранито Вол)

• Before applying the material, the surface should be cleaned of any types of oil, rust, detergents, dirt and other substances that prevent setting, and also clean the surface of old and swollen layers of paint. Old synthetic-based surfaces should be thoroughly sanded and the grinding dust removed from the surface.
• If there are cracks or cavities on the surface, they should be sealed with a repair compound Teknorep 300.
• To prepare the working solution, pour water into a clean container and pour out dry powder, if necessary, you can add a special dye. Using a low-speed mixer, knead the composition until a homogeneous mass is obtained. The amount of water to mix may vary depending on the ambient temperature. Leave preparing mixture for 1-3 minutes, then re-mix the compound.
• Granito Wall is applied to the surface in 2-3 layers with a steel spatula, maintaining a pause between layers in 12-24 hours. The total thickness of the application should be 2-4 mm.
• The pattern is created with a special steel trowel for decorative plaster when applying the top layer of the coating or any other convenient method of applying a finishing decorative coating.
• After the material dries, it is recommended to apply Granito Cila varnish to the surface to give water resistance.

Notes:

• When applying a ceramic-coated material, the surface should be reinforced with a mesh.
• Before using the material, mix the dry powder well.
• The surface must be protected from water for one day after applying decorative plaster. Do not clean the surface with abrasive materials.