Decorative plaster with "Travertine" effect for walls Granito Tarvertino, 20 kg(Гранито Травертино)

Technical specifications

Application instructions

1. Surface preparation:

• The substrate must be dry, sound and free from dust, dirt and grease.
• Old, flaking paint must be completely removed.
• Important: New mineral surfaces must be allowed to cure (withstand a curing period) for at least 28 days.
• Old synthetic coatings must be sanded thoroughly and dust removed.
• Fill cracks with a repair compound (e.g. Teknorep 200).

2. Mixing the mixture:

• Use a low-speed drill with a mixer.
• Pour water into a bucket. If you plan to tint, add the pigment to the water first.
• Gradually pour in the powder, stirring until smooth.
• Let the solution “ripen” for 1–3 minutes, then stir again.

3. Application process:

• Applied with a metal trowel in 2 or 3 layers (with a waiting period between layers).
• Total coating thickness: 2–4 mm.
• The pattern (texture) is created with a metal or effect trowel.
• To obtain a shine, the surface can be “pressed” with a spatula while wet or sanded after drying.

4. Finishing stage:

After completing the work, the entire surface is covered with Granito Cila protective varnish according to the purpose of the room.

Notes on use and restrictions

• Protection: After application, the surface must be protected from contact with water for 24 hours.
• Care: It is forbidden to use abrasive products to clean the finished coating.
• Ceramics: When applying over ceramic tiles, it is mandatory to use a reinforcing mesh.