Granito Vertigo decorative plaster (concrete and stone effect), 20 kg
Granito Vertigo decorative plaster is a cement-based decorative textured wall coating designed to create modern interiors and exteriors with the effect of natural stone or concrete. Ready to use.
3780 uah
Granito Vertigo decorative plaster is a cement-based decorative textured wall coating designed to create modern interiors and exteriors with the effect of natural stone or concrete. Ready to use.
Features
-
Used for finishing facades and interior walls in residential buildings, offices and shopping centers.
-
Allows you to create a variety of decorative patterns, imitating a rough or polished surface.
-
It has high resistance to weathering and mechanical damage.
Advantages
-
Water-based: environmentally safe composition.
-
Economical: easy application and moderate consumption.
-
Decorative: provides a stylish textured finish.
-
High adhesion: excellent adhesion to concrete and plaster.
-
Durability: unlike gypsum mixtures, it does not swell when exposed to water.
Technical specifications
|
Characteristic |
Value |
|
Material condition |
Ready to use |
|
Expiration date |
12 months (in closed packaging, in a dry place) |
|
Packaging |
Plastic bucket 20 kg |
|
Application temperature |
From +5°C to +35°C |
|
Drying time "to touch" |
5–6 hours |
|
Time to complete drying |
24 hours |
|
Density |
1.80 ± 0.15 kg/l |
|
Solids content |
%82 ± 5 |
|
Particle size |
< 750 microns |
|
Cost |
1.0-1.5 kg/m² (varies depending on surface type) |
|
Temperature resistance |
From -30°C to +80°C |
Notes and limitations
Protection: Protect from sun, rain and frost for the first 3 hours after application (outdoors).
Cleaning: Tools should be washed with water immediately after use. Cured material should only be removed mechanically.
Safety: Wear protective clothing, goggles and a mask when working. Avoid contact with skin, if contact occurs, wash with soap and water.
Note: Technical data obtained in the laboratory at a temperature of +20°C and humidity of 50%. Actual figures may vary depending on site conditions.
Application instructions
1. Surface preparation:
-
The surface must be clean, smooth, strong, free of dust, grease, rust and detergent residues.
-
Weak areas of the base must be removed and repaired with Teknorep repair mixtures.
-
Before application, the surface must be primed.
2. Application:
-
The material is applied using a steel trowel using the "strip" method.
-
After leveling the surface, a pattern is created using special tools: a steel trowel, a sea or semicircular sponge to create decorative effects, a stiff brush or a fan-type wire brush.
-
The final aesthetic appearance depends on the chosen tool and the master's technique.
