Teknoflow 100 Plasticizer, 30 kg(Текнофлоу 100)

Products > Additives for concrete

Teknoflow 100 Plasticizer, 30 kg(Текнофлоу 100)

Sold in Leroy Продается в Альцест

Superplasticizer based on naphthalenesulfonate, improves ductility and strength of concrete

1776
uah
x
canister
=
1776 uah

Teknoflow 100 is a liquid superplasticizer based on naphthalene sulfate, which improves the fluidity and strength of concrete and reduces the amount of water when mixing materials.

Application areas:

  • For residential premises, shopping centers, hospitals
  • For large engineering structures, such as subways, highways, dams, tunnels
  • For surfaces that need to be rid of mold
  • To avoid the occurrence of voids in concrete structures
  • To reduce the water permeability of concrete bases
  • For application to the floor screed

Properties of superplasticizer:

  • Increases the plasticity of the compound
  • Prevents the formation of voids
  • Reduces the amount of water in the mixture, which increases its strength and durability
  • Increases strength at low temperatures and in cold climates

Colour

Brown

Expiration date

12 months in the closed original packaging

Packaging

30 kg bucket 

Expenditure

0,5-2 % (relative to the volume of the compound)

Density

1.,0-1,22 kg/l

Chlorine content

< 0,1 %

Alkali content

< 10 %

Adhesion

> 2 N/mm2

Setting time

24 hours

  • The ideal application temperature of the material is from + 5°C to +35 °C in the morning and evening.
  • Before applying the material, the surface should be moistened
  • It is necessary to add a plasticizer in a ratio of 0.5-2 % to the total volume of the cement mixture and mix until a homogeneous compound is obtained.

Notes:

  • If the concrete is poured at low temperatures, it is necessary to protect the surface from freezing.
  • Immediately after filling the material, it is necessary to protect the surface from adverse weather conditions (direct sunlight, high temperatures < +35 °C, precipitation and frost).
  • The work should be carried out in compliance with safety and hygiene standards, using a mask and glasses.
  • The tools and equipment used must be washed immediately after use.

1. What can be added to concrete for strength?

To give strength to the concrete mixture, a liquid superplasticizer can be added in a ratio of 0.5-2% to the total mass of the mixture. Teknoflow Super made by Tekno is considered a good material.

2. What is the plasticizer used for in concrete?

The plasticizer is added to the concrete mix to harden the concrete, increase the plasticity and fluidity of the mixture, as well as to prevent the formation of voids.

3. What can replace the plasticizer for concrete?

Very often, more water is added to increase the plasticity of the concrete mixture, but this reduces the strength of the concrete. It is best to add a special mixture - Teknoflow Super plasticizer, which will not only increase the fluidity of concrete, but also increase its strength and durability.

4. What should be added to the solution so that it does not crack?

Before pouring the concrete mixture, a plasticizer can be added in a ratio of 0.5-2% to the mass of the mixture. This will reduce the amount of water, which will increase the strength and durability of concrete, as well as prevent the formation of cracks.

5. What is a plasticizer?

Plasticizer is an additive in concrete that is used to improve the fluidity and strength of concrete, as well as to reduce the amount of water when mixing materials. Before pouring the concrete mixture, moisten the surface, add the material in a ratio of 0.5-2% to the total mass of the mixture and mix until smooth.

6. What is the plasticizer in the screed for?

Pouring a concrete screed with the addition of a plasticizer prevents the formation of voids and cracks as a result of shrinkage and loss of water from concrete.

7. How to use the plasticizer correctly?

Special preparation for the use of plasticizer is not required. Before pouring the concrete mixture, it is necessary to moisten the surface. Add the plasticizer to the concrete mixture and mix until smooth. 

8. What are fillers and plasticizers?

Fillers and plasticizers are special additives for concrete that perform a number of necessary functions: strengthening concrete, giving water resistance to concrete, increasing wear resistance to concrete, giving plasticity and elasticity to the concrete mixture.

Product publications

What can be added to concrete for plasticity?
What can be added to concrete for plasticity?

Superplasticizers are one of the most common and effective additives for increasing the plasticity of concrete

Read article
How to increase the fluidity of concrete?
How to increase the fluidity of concrete?

The fluidity of concrete is one of the main important characteristics of the material, because its plasticity directly affects its ability to be easily placed in a form or formwork without loss of strength and quality.

Read article
Is it possible to avoid the occurrence of cracks in concrete?
Is it possible to avoid the occurrence of cracks in concrete?

Despite the high strength of concrete structures, over time it can collapse due to the influence of various factors. Especially sensitive to them is initially unprotected or unshored concrete.

Read article
Causes of cracks in concrete after drying
Causes of cracks in concrete after drying

Read article
Why did cracks appear after pouring concrete?
Why did cracks appear after pouring concrete?

In fact, with improper mixing of the concrete mixture, improper pouring or pouring under unfavorable weather conditions, there is such a phenomenon as the appearance of cracks, with which, it does not take long to wait.

Read article
What should I add to the concrete mortar so that it does not crack?
What should I add to the concrete mortar so that it does not crack?

There are many reasons for cracking concrete. This can be both the impact of external factors on concrete surfaces, and non-compliance with the rules of working with concrete at the stage of its mixing or pouring

Read article
Reasons for the destruction of concrete pavement
Reasons for the destruction of concrete pavement

There are a lot of reasons for the destruction of concrete. In this article we will give some examples.

Read article
The principle of operation of plasticizers for concrete
The principle of operation of plasticizers for concrete

A plasticizer for concrete is a special additive that is added when mixing a concrete mixture to give plasticity to the material and reduce the volume of water for mixing.

Read article
Plasticizers for concrete: types and benefits of application
Plasticizers for concrete: types and benefits of application

An excellent example of a plasticizer that increases the plasticity of the concrete mix and reduces the volume of water used during mixing is Teknoflow Super.

Read article
How to prevent crumbling and cracking of concrete
How to prevent crumbling and cracking of concrete

For example, for a store or a shopping center, you can use either quartz topping or varnish, and for a warehouse it is better to make a stronger coating and use corundum topping or apply two types of hardeners at once: corundum topping and varnish.

Read article
What kind of impregnation for concrete to use for industrial floors
What kind of impregnation for concrete to use for industrial floors

The industrial floor must be resistant to the negative effects of moisture, chemicals, must protect the reinforced concrete structure from mechanical influences, temperature changes.

Read article
What are the methods of applying topping
What are the methods of applying topping

Toppings are applied to a freshly laid concrete floor to increase the wear resistance, strength and durability of the surface.

Read article