Often, an important characteristic when choosing waterproofing is its elasticity. After all, withstanding building vibrations, shrinkage and other possible movements of the reinforced concrete structure without damaging the waterproofing layer is possible only with good elasticity of the material, which will stretch and compress without damaging its structure.
Therefore, in this article we will talk about 3 elastic high-quality waterproofing materials.
Elastic waterproofing Teknomer 300 EX
Teknomer 300 EX is an acrylic waterproofing material with polymers in the composition. This is a one-component mixture, ready for application, which makes it very convenient to use. This elastic waterproofing is suitable for application to the following surfaces:
- concrete;
- brick;
- galvanized metal;
- PVC.
The material has good adhesion (1 N / mm2), is resistant to precipitation (including hail) and maintains good elasticity at low temperatures.
Water resistance of waterproofing - 7 Bar.
Elasticity – from 500% to 700%.
Consumption when applied in 1 layer 1 mm thick – 1.5 kg/m2.
A significant advantage of Teknomer 300 EX is its resistance to UV radiation.
Elastic waterproofing Teknomer 200 EX
Teknomer 200 EX is a cement waterproofing material with an emulsion polymer in its composition. This is a two-component mixture, which is mixed in a container of component A with component B using a mixer for 5 minutes before application. Waterproofing can be applied to the following surfaces:
- concrete;
- brick;
- screed;
- plaster.
The material has a very wide range of application: from small shower rooms in residential premises to large engineering structures.
Among the main advantages of waterproofing are:
- durability;
- resistance to sea water, carbon dioxide;
- resistance to calcium and sodium chloride;
- resistance to chlorine ions.
The material penetrates into cracks by 2.5 mm. Withstands operating temperatures from -40 to +80°C.
Material consumption when applied in 2 layers is 2.5-3 kg/m2.
Elastic waterproofing Teknomer 200 EX Crystallize
Teknomer 200 EX Crystallize is a penetrating waterproofing based on cement and polymers. It is a two-component elastic material for waterproofing surfaces such as:
- concrete;
- aerated concrete;
- brick;
- stone;
- plaster.
The material protects the surface from positive and negative water pressure. Water resistance - 10 Bar.
Waterproofing consumption - 1.4 kg/m2 in one layer, (applied in 2 layers)
For additional information and the correct selection of material, call: +38 (067) 486 42 41
