Foundation waterproofing is an important part of the construction process as it helps prevent moisture from entering the building through the soil, which in turn prevents the rapid deterioration of the foundation and the building as a whole. After all, as you know, moisture is one of the most dangerous destructive elements.
In this article we will talk about the material that is suitable for waterproofing the foundation, and step-by-step implementation of the necessary actions.
The best choice for foundation waterproofing
Teknomer 200 Ex Crystallize is the best choice for foundation waterproofing for the following reasons:
- it is an elastic material (withstands shrinkage of new buildings);
- it is a penetrating material (penetrates deeply into the pores and microcracks of concrete, providing high resistance to the positive and negative effects of water at 10 bar);
- does not cause corrosion on reinforcement (will not rust or destroy concrete);
- prevents carbonation in concrete;
- resistant to freezing and thawing cycles (heat resistance - from -40°C to +80°C).
3 steps to properly waterproof your foundation:
Surface preparation
Before applying waterproofing material, it is important to prepare the foundation surface. It must be clean, dry and undamaged. If the latter are present, they should be repaired using Teknorep 300 repair solution.
Application Of Waterproofing Material
Teknomer 200 Ex Crystallize waterproofing material can be applied by brush, roller or spray. It is recommended to carry out work in 2-3 layers. And to achieve better protection, it is necessary to apply each subsequent layer perpendicular to the previous one.
It is also recommended to additionally apply Teknomer Pah Bandi 120/70 sealing tape to the joints and seams.
Surface protection
After waterproofing work, it is important to protect the waterproofing layers from sunlight for 24 hours and any mechanical damage for 7 days.
Proper foundation waterproofing is one of the key steps in building construction and renovation as it helps prevent moisture penetration and maintains the stability of the entire structure.
For additional information and the correct selection of material, call: +38 (067) 486 42 41
