Concrete is a material that requires strengthening and protection, because without auxiliary materials for concrete surfaces, cracks will quickly make themselves felt. Fortunately, there are a large number of special mixtures to eliminate them. We will talk about them in our article.
The best mixtures for vertical concrete repair
First of all, I would like to say about the Teknorep group of products, which are ideal for vertical repair of concrete surfaces. They differ in strength, elasticity, permissible application thickness, etc. Each material from the product group is very easy to use, does not cause corrosion, and is also resistant to freezing and thawing cycles. The average time to put a repaired surface into operation is 24 hours.
We will talk about individual characteristics of the materials below.
Teknorep 200
Teknorep 200 is a thin-layer repair mortar that can be used to repair cracks and any other damage in concrete in layers ranging from 3mm to 30mm. The mixture is perfectly suitable for small repair work. The size of the material granules is 0.7 mm. Suitable for indoor use as it does not contain toxic components.
It is an inelastic material with a strength of 25 N/mm2. Consumption – 1.9 kg/m2.
Teknorep 200 EX
Teknorep 200 EX is a thin-layer mixture for vertical repair of high-strength concrete. The material is elastic, so it has a very wide range of uses. It is used not only to eliminate cracks and fill holes, for example after removing formwork, but also to strengthen reinforced concrete structures. The thickness of the material applied can vary from 3 mm to 30 mm. The compressive strength is 35 N/mm2. Consumption – 1.8 kg/m2.
Teknorep 300
Teknorep 300 is a non-shrink repair material for vertical concrete surfaces. The strength of the material is 60 N/mm2, so it is widely used both in the repair of concrete structures, as well as in strengthening them and increasing their load-bearing capacity. The material has a wide range of advantages, the main of which are: high resistance to shock and vibration, elimination of cracking, fire resistance, moisture resistance, and resistance to chemicals. substances and sulfates.
The material is applied in one layer with a thickness of 10 mm to 40 mm. Consumption – 1.9 kg/m2.
Teknorep 300 EX
Teknorep 300 EX is a non-shrinking elastic material suitable for repairing all types of reinforced concrete structures. The material is waterproof, resistant to sulfates and chlorine, and has high compressive strength (60 N/mm2). The elastic modulus of the material is 20 Gpa. Application thickness – 10-40 mm. Mixture consumption – 1.8 kg/m2.
All of the above materials are suitable for repairing concrete walls. And in order to get a free consultation and help in choosing the most suitable material, please call: 044 466 46 47.
