Teknobar(C) (Текнобар (Ц)

Products > Structural bonding and reinforcement of structures

Teknobar(C) (Текнобар (Ц)

Carbon fiber tape


Введите свои данные

Teknobar(C) is an epoxy impregnated unidirectional carbon fiber tape.

Areas of application:

  • To increase the load-bearing capacity of floors, beams and bridges
  • For strengthening columns, beams and canopies
  • When eliminating deflections in floors
  • For repairing deflectors and balconies
  • When repairing damaged structural elements
  • For bridges with increased load
  • For the reconstruction of historical objects


  • Easy to use
  • Has high mechanical and chemical resistance.
  • Has a high elastic modulus
  • Minimum weight and material thickness


Химическая основа Лента на основе карбоновых волокон
Упаковка По требованию
Срок годности Неограниченный при соблюдении правильных условий хранения
Условия хранения Хранить в сухой среде от +5 до +30 °C, в закрытой оригинальной упаковке.
Цвет Черный
Диаметр 7,5 мм – 12 мм – 20 мм
Размер 3 м
Прочность на разрыв > 2800 МПа
Модуль упругости на растяжение > 165,000 МПа
Удлинение при разрушении 1,70%
Температура возгорания 180 °C


Surface quality, seams and seams must be dry and free from any kind of dust, dirt, loose and loose particles, grout residues, oil and grease. If present on weak concrete parts, they should be removed and the surface repaired with Teknogrout or Teknorep repair mortars.
First you need to prepare and cut the tapes of the desired length. After that, Teknobond 400 epoxy adhesive should be prepared and spread evenly on the concrete surface and on the tape in a thin layer using a spatula. Remains of glue should be removed immediately with a plastic roller with small teeth.


  • A structural reinforcement project should be designed and executed under the supervision of an experienced civil engineer.
  • Clean tools and equipment with water immediately after use. Hardened material can only be removed mechanically.
  • The product may cause irritation if it comes into contact with the skin. Work clothes, protective gloves, mask and goggles must be used. Before starting work, you can apply a protective cream on your hands. In case of contact with eyes, immediately rinse eyes with warm water and seek medical advice.

Product publications

How to reconstruct a historical site
How to reconstruct a historical site

This article outlines the basic steps to consider when planning and executing a renovation of a historic property.

Read article
How and with what to strengthen reinforced concrete structures?
How and with what to strengthen reinforced concrete structures?

To strengthen reinforced concrete structures, a condition analysis must be performed to determine the best method and materials for strengthening

Read article
How to strengthen a reinforced concrete column?
How to strengthen a reinforced concrete column?

It is important to conduct thorough engineering research and analysis before beginning column reinforcement to select the best method and ensure its effectiveness and safety.

Read article