Teknobond 300 Tix (Текнобонд 300 Тикс)

Chemical basis	Epoxy resin based mixture
Package	5 kg packaging
Best before date	12 months
Storage conditions	Store in a dry environment from +5 to +30 °C, in closed original packaging
Color	Ecru
Density	1.25±0.03 kg/l
Consumption	1-1.5 kg/m2 for 300 kg/m2
Adhesion to concrete	4 N/mm2
Bending strength	40 N/mm2
Compressive strength	80 N/mm2
Tear strength	30 MPa

Surface quality, seams and joint surfaces must be dry and free from any kind of dust, dirt, loose and loose particles, grout residues, oil and grease. If present on weak concrete parts, they should be removed and the surface repaired with Teknogrout or Teknorep repair mortars.
The concrete base must be strong and have sufficient compressive strength (minimum 25 N/mm²) and a peel strength of at least 1.5 N/mm².
Component B should be added to component A and mixed with a low speed electric mixer (400 rpm) for 2-3 minutes until a homogeneous working mixture is obtained.
First you need to prepare and cut the carbon fibers of the required size. The epoxy glue should be evenly applied to the concrete surface with a spatula, and then the carbon fiber should be pressed to the surface. Remains of glue should be removed immediately with a plastic roller with small teeth.
After the completion of the laying of carbon fibers, it is recommended to sprinkle with a thin layer of sand and apply plaster, because carbon fibers do not burn, however, the epoxy grout can catch fire at a certain temperature.

Notes:

• Do not use temperatures below the minimum allowable for complete hardening of the material (+50 C).
• Foreign matter and water should not be added to the solution.
• Clean tools and equipment with water immediately after use. Hardened material can only be removed mechanically.
• The product may cause irritation if it comes into contact with the skin. Work clothes, protective gloves, mask and goggles must be used. Before starting work, you can apply a protective cream on your hands. In case of contact with eyes, immediately rinse eyes with warm water and seek medical advice.

• Тех карта Teknobond 300 Tix.docx.docx