Teknobar(G) — Купить (Текнобар (Дж) |

Teknobar(G) (Текнобар (Дж)

Fiberglass rod

Dmitry Pisansky

+380674864241

Description
Features
Instruction
Files

Teknobar(G) are unidirectional fiberglass epoxy impregnated rods.

Applications:

To increase the bearing capacity of floors, beams and bridges
For strengthening columns, beams and canopies
When eliminating deflections in floors
For repair of deflectors and balconies
When repairing damaged structural elements
For bridges with increased load
For the reconstruction of historical objects

Characteristics:

Easy to use
It has high mechanical and chemical resistance.
Has a high modulus of elasticity
Minimum weight and material thickness

Химическая основа	Стержень из стекловолокна
Упаковка	По требованию
Срок годности	Неограниченный при соблюдении правильных условий хранения
Условия хранения	Хранить в сухой среде от +5 до +30 °C, в закрытой оригинальной упаковке.
Цвет	Белый
Размер	2 м/6 м
Диаметр	8 мм/12 мм/16 мм/20 мм/25 мм/28 мм
Прочность на разрыв	> 1,600 МПа
Модуль упругости на растяжение	> 53,000 МПа
Удлинение при разрушении	3%
Температура возгорания	180 °C

The quality of the surface, seams and joints must be dry and free of any kind of dust, dirt, weak and loose particles, cement mortar residues, oil and grease. If present on weak concrete parts, they should be removed and the surface repaired using Teknogrout or Teknorep repair mixtures.
First, prepare Teknobond 400 epoxy adhesive and then apply it evenly to the concrete surface and core using a spatula. Remaining glue should be removed immediately with a plastic roller with small teeth.

Notes:

A structural strengthening project should be designed and executed under the supervision of an experienced structural engineer.
Immediately after use, clean tools and equipment with water. Hardened material can only be removed mechanically.
The product may cause irritation if it comes into contact with the skin. It is necessary to use work clothes, protective gloves, a mask and goggles. Before starting work, you can apply protective cream to your hands. In case of contact with eyes, rinse eyes immediately with warm water and consult a doctor.