Teknowrap C (Текноуреп С)

Products > Structural bonding and reinforcement of structures

Teknowrap C (Текноуреп С)

Reinforcing carbon fiber rope

CHECKOUT

Введите свои данные

Teknowrap C is a unidirectional carbon fiber reinforcing rope.

Applications:

  • To increase the bearing capacity of brick and stone structures
  • For the restoration of historical objects
  • To increase the strength and stability of structures in the attachment points

Characteristics:

  • Easy to use
  • It has high mechanical and chemical resistance.
  • Has a high modulus of elasticity
  • Minimum weight and material thickness
Химическая основа Веревка из углеродного волокна
Размер 200 мм
Срок годности Неограниченный при соблюдении правильных условий хранения
Условия хранения Хранить в сухой среде от +5 до +30 °C, в закрытой оригинальной упаковке.
Цвет Черный
Диаметр 5 мм – 12 мм
Плотность 1,8 г/см3
Прочность на разрыв > 3800 МПа
Модуль упругости на растяжение > 230,000 МПа
Удлинение при разрушении 1,70%

 

Surface quality, seams and seams must be dry and free from any kind of dust, dirt, loose and loose particles, grout residues, oil and grease. If present on weak concrete parts, they should be removed and the surface repaired with Teknogrout or Teknorep repair mortars.
The concrete base must be strong and have sufficient compressive strength (minimum 25 N/mm²) and a peel strength of at least 1.5 N/mm².
First you need to prepare and cut the rope to the desired length with scissors or a clerical knife. After that, you should prepare Teknobond 300 epoxy glue, soak the rope with it and put it into the previously prepared seams.

Notes:

  • A structural reinforcement project should be designed and executed under the supervision of an experienced civil engineer.
  • Clean tools and equipment with water immediately after use. Hardened material can only be removed mechanically.
  • The product may cause irritation if it comes into contact with the skin. Work clothes, protective gloves, mask and goggles must be used. Before starting work, you can apply a protective cream on your hands. In case of contact with eyes, immediately rinse eyes with warm water and seek medical advice.

Product publications

How to strengthen a reinforced concrete structure with non-standard geometry
How to strengthen a reinforced concrete structure with non-standard geometry

Composite materials such as fiberglass or carbon fiber can be used to reinforce irregular shapes and surfaces.

Read article
How to strengthen a reinforced concrete column?
How to strengthen a reinforced concrete column?

It is important to conduct thorough engineering research and analysis before beginning column reinforcement to select the best method and ensure its effectiveness and safety.

Read article