05 Jul 2024
High-quality varnish for concrete
The main key factor for choosing concrete varnish is the operating conditions
Read articleAcrylic lacquer Teknocila 400(Текносила 400)
Water-based acrylic varnish to protect mineral surfaces
Teknocila 400 is a highly effective white water-based acrylic varnish for the protection of mineral surfaces. It is used as a finishing coating.
Areas of application:
- To protect the concrete screed from moisture
- To protect some decorative floor and wall coverings, for example, with the effect of marble
- For use as an alternative material on surfaces on which it is not desirable to apply glossy coatings on a solvent
Properties of the varnish:
- Increases the wear resistance of the concrete surface
- Water Resistant
- Makes the surface resistant to many chemicals and alkalis
- Vapor permeable
- Increases the strength of the surface
- Prevents dust formation on the surface
- Easy to apply
- Does not contain solvents
- Forms a good translucent film on the surface
- Protects the surface from discoloration as a result of precipitation
- The surface can be washed with water
| Colour | White liquid |
| Packaging | Bucket 10 l / 30 l |
| Expiration date | 12 months in the closed original packaging |
| Commissioning | 7 days |
| Application of the 2nd layer | After 2-3 hours |
| The beginning of setting | 60 minutes |
| Life time of the compound | 2 hours |
| Expenditure | 0,1-0,15 l/m2 |
| Application temperature | +5°C - +35°C |
| Wear resistance | < 60 mg |
- Before applying the material, the surface should be cleaned of any types of oil, rust, detergents, dirt and other substances that prevent setting.
- The surface must be dry, strong and firm. The best methods of surface preparation are steam cleaning, high-pressure water jet or grinding.
- The Teknocila 400 varnish is ready for use. Mix the material before use.
- The material can be applied with a brush with a short pile, a roller or a mechanical sprayer in 2 layers.
Notes:
- Do not apply the material during and an hour before precipitation.
- During application and within 24 hours after application of the material, the air temperature should not be less than +5 °C.
- The tools and equipment used should be washed immediately after use.
- The product may cause irritation if it gets on the skin. It is necessary to use work clothes, protective gloves, a mask and glasses. Before starting work, you can apply a protective cream on your hands.
- Work should be carried out at a great distance from any sources of fire, such as welding and cutting machines, and also do not smoke near the surface with varnish, since the material is flammable.
1. What kind of varnish is suitable for concrete?
When choosing a varnish for concrete, the main thing is to choose a reliable manufacturer that produces high-quality material. For example, using Teknocila 400 acrylic varnish, the concrete will be reliably protected and strengthened.
2. What does acrylic varnish mean?
Acrylic varnish is a varnish based on an acrylic emulsion. The material is used as a finishing coating.
3. How is acrylic varnish applied?
Acrylic varnish on a clean concrete surface should be applied in 2 layers with a short-pile brush, roller or mechanical sprayer.
4. What is the difference between polyurethane varnish and acrylic?
Both polyurethane and acrylic varnish are considered reliable protection of concrete surfaces. Both types of varnishes make the surface wear-resistant, durable, waterproof and resistant to chemicals.
5. What kind of varnish can be used to cover a concrete floor?
The concrete floor can be covered with high-quality acrylic varnish Teknocila 400, thanks to which you can create a beautiful durable matte or semi-matte finish.
Product publications
17 Aug 2023
What is the best way to cover concrete outdoors?
Outdoor concrete coating can be selected depending on specific requirements and operating conditions
Read article
10 Aug 2023
Does concrete need to be primed before varnishing?
In most cases, priming the concrete before applying the varnish is the desired procedure
Read article
13 Jul 2023
Varnishes for concrete: types and coating technology
To protect and finish concrete surfaces, special varnishes are often used, thanks to which a durable, protected matt or glossy surface can be achieved.
Read article
18 Nov 2022
Is it possible to avoid the occurrence of cracks in concrete?
Despite the high strength of concrete structures, over time it can collapse due to the influence of various factors. Especially sensitive to them is initially unprotected or unshored concrete.
Read article
15 Jun 2022
Properties of acrylic varnish for concrete and the rules of choice
When applied to concrete, acrylic varnish performs two functions at once: it strengthens the surface and gives a beautiful glossy or matte appearance to the surface.
Read article
14 May 2022
What kind of varnish is suitable for concrete
In addition to improving the strength characteristics, increasing wear resistance, insulation and protection of concrete, varnish for concrete creates a beautiful surface that can be both glossy and matte or semi-matte.
Read article
10 May 2022
Properties of acrylic varnish for concrete and selection rules
Acrylic varnish is used to protect mineral surfaces from moisture, chemicals, UV rays, precipitation, to increase the service life of surfaces, to create a beautiful decorative finish of vertical and horizontal surfaces.
Read article
10 May 2022
What kind of impregnation for concrete to use for industrial floors
The industrial floor must be resistant to the negative effects of moisture, chemicals, must protect the reinforced concrete structure from mechanical influences, temperature changes.
Read article
