Epoxy primer Teknobond 307 15 kg (Текнобонд 307)

Color	Transparent
Package	5 kg / 15 kg (А + В)
Best before date	12 months in a dry environment in unopened packaging
Mixture density (TS EN 2811-1)	1.10 + 0.02 g/ml
Pot life of the mixture	> 30 min (may vary depending on weather conditions)
Drying time of the layer	24 - 72 hours
Mixing ratio	2 components A: 1 component B
Время полного высыхания материала	7 days
Application temperature	+10 °C - +30 °C
Surface moisture	< 4 %
Relative humidity	up to 80%
Consumption	100 - 200 g/m² (at an application thickness of 1 mm)
Bending strength (TS EN 196-1)	> 20 N/mm²
Compressive strength (TS EN 196-1)	> 70 N/mm²
Adhesion to concrete surfaces (TS EN 4624)	> 4 N/mm²
Adhesion to metal surfaces (TS EN 4624)	< 3 N/mm²
Shore D hardness	85
Heat resistance	+80 °C

Instructions for use:

Before applying the material, clean the surface of any oil, rust, detergents, dirt, or other substances that may prevent adhesion.
The recommended compressive strength of the concrete screed should be at least 25 N/mm², and the tensile strength at least 1.5 N/mm². To prepare the working solution, pour component B into component A and mix the mixture with a low-speed mixer for 2-3 minutes until smooth.

The primer can be applied to the surface with a brush, roller, or mechanical sprayer in 2 coats.

Application Notes / Limitations:

Do not use the material at temperatures below 3°C (36°F). Otherwise, the coating will take a very long time to dry.
If the material is stored at temperatures below 5°C (41°F), the primer may crystallize.

This product may cause irritation if it comes into contact with the skin. Wear protective clothing, gloves, a mask, and goggles. You can also apply a barrier cream to your hands before starting work. In case of contact with eyes, rinse immediately with warm water and seek medical attention.
Wash all tools and equipment immediately after use.