Epoxy paint for concrete floors Teknobond 600 5 kg gray (RAL 7031)(Текнобонд 600)

Color	Behind the RAL palette
Density of the compoun	1,54±0,02 g/ml
Expiration date	12 months in the closed original packaging
Packaging	Set: metal buckets 4.1 kg + 0.9 kg
Expenditure	0,250-0,300 kg/m2 (when applied in 1 layer)
Life time of the compound	40 minutes (depends on weather conditions)
Application temperature	+10 - +30 °C
Proportions of the compound	Component A 8.2 : Component B 1.8 (by weight)
Adhesion to concrete	> 4 H/mm2 (TS EN 4624)
Wear resistance	60-70 mg (CS 10/100/1000)                                                      (DIN 53109)
Commissioning	7 days

• Before applying the material, clean the surface from any types of oil, rust, detergents, dirt and other substances that prevent setting.
• If there are cracks or voids on the concrete or asphalt surface, they should be repaired beforehand.
• To mix the working mixture, mix component A and component B using a low-speed mixer until a homogeneous mass is obtained.
• The material should be applied to the surface, smoothed with a trowel and walked with a needle roller in order to avoid the formation of bubbles.

Notes:

• It is not recommended to use the material at temperatures below +10 °C. The lower the temperature of the air and the surface when using the paint, the longer the material will dry.
• The lifetime of the compound depends on the air temperature.
• After applying the paint, the surface should be protected from adverse weather conditions, such as direct sunlight, strong wind, high air temperature (above +35 °C), rain and frost.
• If the paint dries in direct sunlight, it may lose its color and become faded.
• The tools and equipment used should be cleaned immediately after use.
• The product may cause irritation if it gets on the skin. It is necessary to use work clothes, protective gloves, a mask and glasses. Before starting work, you can apply a protective cream on your hands. In case of contact with the eyes, rinse the eyes immediately with warm water and consult a doctor
• Store in a dry environment in the closed original packaging for 12 months.

1. What is epoxy paint for?

Epoxy paint is used for application on concrete, metal, wood and plaster surfaces. Teknobond 600 is a high-quality two-component epoxy paint for indoor and outdoor use.

2. How much does epoxy paint cost?

The cost of epoxy paint may vary depending on the manufacturer. Call 0 800 307 050 to find out the current prices.

3. Which paint is better to paint the concrete floor?

The concrete floor is best painted with waterproof epoxy paint, for example, Teknobond 600. The paint density is 1.54 g/ml. You can choose any colors from the RAL palette.

4. How can I paint a concrete screed?

Both concrete screed and other surfaces can be painted with epoxy paint, as it has a very high adhesion (more than 4 H/mm²) and a wide range of application areas. 

5. Which concrete paint is better?

The paint to be applied to concrete should be chosen depending on the needs during the operation of the surface. A win-win option is considered to be Teknobond 600 epoxy paint, which is not only a beautiful decorative coating, but also protects concrete from the effects of an aggressive environment.

6. What is the best way to paint a concrete surface?

It is recommended to paint the concrete surface with a special dense high-quality paint with high adhesion and wear resistance. A good choice is the two-component epoxy paint Teknobond 600.

7. How long does the paint stay on concrete?

When choosing a high-quality material and performing the work correctly, the paint will be a durable finish that can be washed and that is not afraid of exposure to chemicals.

8. Is it possible to paint on cement?

Not every paint can paint cement. It is recommended to use paints based on epoxy resins, which have excellent adhesion and strength characteristics. 

9. Do I need to prime the concrete floor before painting?

The need to prime the surface with a primer depends on the chosen paint. For example, when using Teknobond 600 epoxy paint, the main condition is a clean, smooth and durable surface without cracks and voids.