12 Aug 2024
Epoxy paint for concrete floors
In this article, we will talk about the advantages of strengthening a concrete floor with epoxy paint
Read articleEpoxy paint for concrete floors Teknobond 600, 5 kg, moss green color (RAL 6005)
Teknobond 600 is a two-component epoxy light gray paint for application to concrete, metal, wooden and plastered surfaces, resistant to aggressive environments and chemicals.
4236 uah
x
set.
=
4236 uah
Teknobond 600 is a two-component epoxy paint for application on concrete, metal, wood and plaster surfaces, resistant to aggressive environments and chemicals.
Areas of application:
- For external and internal use
- For application on surfaces in rooms with high humidity
- For application on surfaces on objects with an aggressive environment
- For use in food factories and laboratories
- For covering materials such as parquet, tiles, ceramics, granite, mosaic, porcelain, glass
- For application on walls, ceilings and floors.
Paint Properties:
- Waterproof
- Resistant to chemicals and bacteria
- Frost - resistant
- Durable
- Can be washed
| Color | Behind the RAL palette |
| Density of the compoun | 1,54±0,02 g/ml |
| Expiration date | 12 months in the closed original packaging |
| Packaging | Set (20 kg): metal drums 16.4 kg + 3.6 kg Set (5 kg): metal drums 4.1 kg + 0.9 kg |
| Expenditure | 0,250-0,300 kg/m2 (when applied in 1 layer) |
| Life time of the compound | 40 minutes (depends on weather conditions) |
| Application temperature | +10 - +30 °C |
| Proportions of the compound | Component A 8.2 : Component B 1.8 (by weight) |
| Adhesion to concrete | > 4 H/mm2 (TS EN 4624) |
| Wear resistance |
60-70 mg (CS 10/100/1000) (DIN 53109) |
| Commissioning | 7 days |
Surface preparation
- Before applying the material, clean the surface from any types of oil, rust, detergents, dirt and other substances that prevent setting.
- If there are cracks or voids on the concrete or asphalt surface, they should be repaired beforehand.
- To mix the working mixture, mix component A and component B using a low-speed mixer until a homogeneous mass is obtained.
- The material should be applied to the surface, smoothed with a trowel and walked with a needle roller in order to avoid the formation of bubbles.
Notes:
- It is not recommended to use the material at temperatures below +10 °C. The lower the temperature of the air and the surface when using the paint, the longer the material will dry.
- The lifetime of the compound depends on the air temperature.
- After applying the paint, the surface should be protected from adverse weather conditions, such as direct sunlight, strong wind, high air temperature (above +35 °C), rain and frost.
- If the paint dries in direct sunlight, it may lose its color and become faded.
- The tools and equipment used should be cleaned immediately after use.
- The product may cause irritation if it gets on the skin. It is necessary to use work clothes, protective gloves, a mask and glasses. Before starting work, you can apply a protective cream on your hands. In case of contact with the eyes, rinse the eyes immediately with warm water and consult a doctor
- Store in a dry environment in the closed original packaging for 12 months.
Product publications
07 Jun 2022
Technology of applying epoxy paints
Epoxy paint is a two–component paint that is produced on the basis of epoxy resins and is used for application to materials such as parquet, tile, granite, ceramics, mosaic, glass and porcelain.
Read article
