Water-based epoxy paint, vapor-permeable Teknobond 620, set of 5 kg. Light gray (RAL 7001)
Teknobond 620 is a two-component water-based epoxy paint for application to concrete, metal, ceramic, wooden and plastered surfaces, resistant to aggressive environments and chemicals.
4698 uah
Teknobond 620 is a two-component water-based epoxy paint for application to concrete, metal, ceramic, wooden and plastered surfaces, resistant to aggressive environments and chemicals.
Scope of application
- For external and internal use
- For application on surfaces in rooms with high humidity
- For application on surfaces on objects with aggressive environments
- For use in food factories and laboratories
- For covering materials such as parquet, tiles, concrete, ceramics, granite, mosaic, porcelain, glass
- For application to walls, ceilings and floors
Properties
- Waterproof
- Vapor permeable
- Resistant to chemicals and bacteria
- Frost-resistant
- Durable
- Washable
|
Indicator name |
Normative value |
|
Color |
Compliance with the RAL palette |
|
Density of the mixture |
1.54±0.02 g/ml |
|
Expiration date |
12 months in closed original packaging |
|
Packaging |
Set: 20 kg / 5 kg |
|
Cost |
0.250 – 0.300 kg/m2 (when applied in 1 layer) |
|
Mixture life |
40 min (depending on weather conditions) |
|
Application temperature |
+5 - +30 °C |
|
Mixture proportions |
Component A 8.2 : Component B 1.8 (by weight) |
|
Adhesion to concrete |
> 4 H/mm2 ( TS EN 4624) |
|
Durability |
60 - 70 mg (CS 0/100/1000) (DIN 53109) |
|
Complete curing |
3 days |
Surface preparation
Before applying the material, clean the surface from any types of oil, rust, detergents, dirt and other substances that prevent setting.
If there are cracks or potholes on the concrete or asphalt surface, they should be repaired beforehand.
Preparation of working solution
To knead the working mixture, mix component A and component B using a low-speed mixer until a homogeneous mass is obtained.
Application
The material should be applied to the surface with a roller, brush or sprayer.
Notes
- It is not recommended to use the material at temperatures below +10 °C. The lower the air and surface temperature when applying the paint, the longer the material will dry.
- The life of the mixture also depends on the air temperature.
- After applying the paint, protect the surface from adverse weather conditions such as direct sunlight, strong wind, high air temperature (above +35°C), rain and frost.
- If the paint dries in direct sunlight, it may lose its color and become faded.
- Tools and equipment used should be cleaned immediately after use.
Safety measures
The product may cause irritation if it comes into contact with the skin. It is necessary to use work clothes, protective gloves, a mask and glasses. Before starting work, you can apply a protective cream to your hands. In case of contact with eyes, immediately rinse your eyes with warm water and consult a doctor.
