Epoxy paint Teknobond 650

Products > Materials for industrial floors

Epoxy paint Teknobond 650

Epoxy paint for concrete, metal, wood and plaster surfaces.


Введите свои данные

Teknobond 650 is epoxy paint, resistant to corrosive conditions and chemicals. Can be applied on concrete, metal, wood, plaster surfaces.


  • Indoors and in open spaces
  • For any surface that can use chemicals.
  • In food factories, laboratories (especially in areas with high humidity).
  • Used for coating materials such as flooring, tile, ceramic, granite, mosaic, porcelain, glass.
  • Suitable for walls, ceilings and floors.


The features and benefits

  • Waterproof
  • Resistant to chemicals and bacteria.
  • Resistant to frost.
  • High strength and durable.



From RAL palette

The density of the mixture

1.2 g/ml

Shelf life

12 months in unopened original packaging


20 kg set


0.5 kg/m2 (one layer)


60 min (depends on weather conditions)

Application temperature

5 °C - 35 °C

Operating temperature

-20 °C - 60 °C

Mixture proportions

4.5 part A: 1 part B (by weight)

The bond strength with concrete

> 4 n/mm2 (TS EN 4624)

Full cure

7 days


Usage instructions

Surface for application must be solid, clean, dry and not to contain extraneous substances. The surface should be as smooth, have no cracks or other damage. If there are areas in the form of cracks and cavities on surface should be repaired using the easy cement mixes Teknorep 300 and Teknorep 300EX.

After adding component B to component A and mix for 2-3 minutes with low speed electric mixer (max 400 rpm) until a homogeneous mixture.

Cleaning of the equipment. Immediately after application equipment must be cleaned with solvent Tekno.

Notes on application:

For most high-quality curing of material, do not use the boundary temperature regimes. Low temperatures slow down the curing process, while higher temperatures accelerate the curing process. Viability will also vary depending on the temperature.
After application the surface should be protected from direct sunlight, strong wind and high air temperature (above 35° C).
If your mixture to the skin it should be washed with water with detergent. In case of contact with eyes, rinse with plenty lukewarm water and seek medical help.