Teknobond 960 Road Marking Paint 25 kg (Blue)

Chemical structure	Based on synthetic resin and solvent
Color	Yellow, white, red, blue, green (any color from the RAL palette on order from 200 kg)
Density	1.70 ±0.05 kg/l
Packaging	25 kg
Expiration date	12 months in closed original packaging
Cost	150± 5 g/m 2  per layer
Grasping	~15 minutes
Resistance to dust ingress	~ 40 minutes (23 °C)
Complete curing	~ 3.5 hours (23 °C)
Application temperature	+5 - +35 °C

INSTRUCTIONS FOR USE

• Before applying the material, clean the surface from any types of oil, rust, detergents, dirt and other substances that prevent setting. Recommended tensile strength - from 1.5 N/mm 2 . 
• If there are cracks or potholes on the concrete or asphalt surface, they should be repaired first.
• Before applying the material, clean the surface from any types of oil, rust, detergents, dirt and other substances that prevent setting. Recommended tensile strength - from 1.5 N/mm 2 .
• If there are cracks or potholes on the concrete or asphalt surface, they should be repaired first.
• The paint is applied in one layer, but if it is necessary to apply the material in 2 layers - the second should be applied after 1 hour. It is applied with a brush, roller or a special device for marking road paint.
• If necessary, the paint can be diluted with Tekno thinner in an amount of 5-8% by volume/weight of the paint and applied using a mechanical sprayer. It is necessary to wait 15 minutes between coats.

Notes:

• Paint should never enter sewers or drains.
• After partial use, the paint container must be tightly closed.
• Do not apply paint during rain.
• Do not dilute paint with water.
• After applying the paint, the surface should be protected from adverse weather conditions, such as direct sunlight, strong wind, high air temperatures (above +35 °C), rain and frost.
• Tools and equipment used must be cleaned immediately after use.