Paint for asphalt and concrete based on synthetic resin and solvent Teknobond 960, 25 kg (Gray color) RAL 7001(Текнобонд 960)

Chemical structure	Based on synthetic resin and solvent
Colour	Gray
Density	1,70±0,05 kg/l
Packaging	25 kg
Expiration date	12 months in the closed original packaging
Expenditure	150± 5 g/m2 (with one layer of application)
Grasping	~15 minutes
Resistance to the influence of dust	~ 40 minutes (23 °C)
Full cure	~ 3.5 hours (23 °C)
Application temperature	+5 - +35 °C

• Before applying the material, clean the surface from any types of oil, rust, detergents, dirt and other substances that prevent setting. The recommended tensile strength is from 1.5 N/mm2.
• If there are cracks or voids on the concrete or asphalt surface, they should be repaired beforehand.
• The paint is applied in one layer, but if necessary, the application of the material in 2 layers - the second should be applied after 1 hour. It is applied with a brush, roller or a special device for marking road paint.
• If necessary, you can dilute the paint with Tekno solvent in an amount of 5-8 % by volume / weight of the paint and apply it using a mechanical sprayer. Between the layers, you need to pause for 15 minutes.

Notes:

• In no case should the paint penetrate into the sewers or drains.
• After partial use, the paint container must be tightly closed.
• Do not use paint in the rain.
• Do not dilute the paint with water.
• After applying the paint, the surface should be protected from adverse weather conditions, such as direct sunlight, strong wind, high air temperature (above 35 °C), rain and frost.
• The tools and equipment used should be cleaned immediately after use.