Teknobond 956 water-based fire-resistant paint for concrete and wood, white, 25 kg
One-component, water-based fire-resistant paint for reliable protection of concrete and wood. It has high resistance to fire, abrasion and UV, dries quickly, is odorless and easy to apply. Ideal for residential, commercial and industrial facilities with increased fire safety requirements.
6732 uah
Teknobond 956 is a professional one-component water-based fire-resistant paint with special polymer additives, which creates a reliable protective coating with high resistance to fire, abrasion and ultraviolet light.
This is a fire-retardant coating for wood, concrete and reinforced concrete structures, brick, stone. The material significantly increases the level of fire safety and extends the service life of structures.
Areas of application
Fireproof coating is used for fire protection:
-
elements of roofing structures: rafters, lags and lathing;
-
support beams, wooden frames and load-bearing units;
-
interfloor ceilings, cladding and interior cladding;
-
board and sheet materials: OSB, plywood, chipboard, fiberboard, lining;
-
wooden window systems and door structures.
Recommended for use at facilities for various purposes:
-
private houses, apartments and residential complexes;
-
educational and medical institutions: kindergartens, schools, hospitals;
-
office, commercial and administrative premises;
-
production and industrial facilities;
-
evacuation corridors, stairwells and emergency exits;
-
structural elements of railway rolling stock.
The principle of operation of Teknobond 956 fire-retardant paint:
After application, the material forms a protective coating on the surface, which, under the influence of high temperatures, reduces the risk of ignition and slows the spread of fire.
Main advantages
-
High level of fire protection - class B1;
-
Resistance to UV radiation
-
Comprehensive protection of wood;
-
Safe for use in residential and public spaces;
-
Easy to apply with a brush, roller or spray;
-
Creates a durable protective coating for wooden, concrete and reinforced concrete structures;
-
Suitable for interior and exterior work.
|
Basis |
water-based, special polymer |
|
Packaging |
25 kg |
|
Shelf life |
12 months in unopened original packaging |
|
Color |
white |
|
Density |
~1.60 g/ml |
|
Cost |
0.3–0.5 kg/m² (1 layer) |
|
Life time of the mixture |
~60 min |
|
Dry to the touch |
40–50 min |
|
Complete drying |
5–6 hours |
|
Adhesion |
≥ 1.0 N/mm² |
|
Application temperature |
from +5°C to +35°C |
|
Fire resistance class |
B1 |
Before processing, the base should be thoroughly cleaned of dust, dirt, grease stains and other contaminants. The material is applied in a continuous, uniform layer over the entire surface in one of the convenient ways:
-
with a brush;
-
roller;
-
by airless or standard spraying method.
Irregularities, cracks and defects must be repaired beforehand with appropriate Teknogrout/Teknorep repair mixtures. Stir the paint thoroughly before use.
Apply in 1 layer, if necessary, a second layer - no earlier than after 1 hour.
To ensure the required level of fire protection, the recommended material consumption is 300–500 g/m², depending on the type and absorbency of the substrate.
Important recommendations
-
Do not apply in frost or rain.
-
Do not dilute with water.
-
Protect the coating from rain, sun and frost until completely dry.
-
Clean tools immediately after application.
