Waterproofing compound Teknomer 200(Текномер 200)

Products > Waterproofing materials

Waterproofing compound Teknomer 200(Текномер 200)

Two component waterproofing material based on an emulsion polymer and special additives

1860 uah
Wholesale price 1674 uah from 10 set.

For you, there will be a greater sense of the price of the proposition. Be affectionate, send a request and managers create an individual prorachunok for you.


Введите свои данные

Teknomer 200 is a two component waterproofing compound based on an emulsion polymer and special additives that increase water resistance. It gives the applied surfaces a high resistance to positive water pressure. Creates protection against leaks and penetration of surface water. It consists of a powder component based on cement, a liquid component based on an emulsion polymer and special additives. 

Scope of application:

  • For internal and external application
  • For horizontal and vertical surfaces
  • For application on concrete, brick, plaster and screed
  • For building foundations
  • For ground floors and basements
  • For showers and bathrooms
  • For water tanks
  • For large engineering structures, such as subways, highways, dams, tunnels

Properties of waterproofing:

  • It is resistant to positive water pressure
  • Does not shrink
  • Non-toxic, may come into contact with drinking water
The composition of the material Component A: grey powder
Component B: white liquid
Expiration date 12 months in a dry environment in a closed package
Packaging 20 + 5 kg (A + B)
The density of the mixture  1.78 (+ 0.50) kg/l
Commissioning 3 days
Adhesive strength (TS EN 1542) > 1.28 N/mm2
Pot life time of the compound  120 min 
Water vapor penetration (TS EN iso 7783-2) < 0,6 gr/(h.cm2)
Water penetration (TS EN 1062-3) < 0,1 kg/(m2.h) 
Water resistant  5 Bar (positive)
Thermal stability - 25°C - + 80 °C
Fire resistance Bs1d0 

Consumption table:

Tecnomer 200 Compound density (kg/l) Consumption of powdper 1 m2 in 2 layers (kg) 
Component A - 20 kg, Component B - 5 kg 1,75 2,5 - 3,0
  • Before applying the material, the surface should be cleaned of any types of oil, rust, detergents, dirt and other substances that prevent setting.
  • If there are cracks or other damages on the surface, they must be previously repaired with Teknorep repair solutions. Use Tekomer 200 3-4 days after surface repair.
  • You should also determine the water pressure. Teknomer 200 is resistant to positive water pressure. If the water pressure is negative, do not use this waterproofing.
  • On the surface to be tiled, you should work out every corner with the help of Teknomer pah bandi tape.
  • Teknomer 200 should be applied to the surface with a brush or a spatula. Each next layer should be applied perpendicular to the previous one.
  • The layer is considered dried when it ceases to be imprinted on the fingers.
  • When applying waterproofing to the screed, it is necessary to use a waterproofing grid between the layers.
  • To prepare the waterproofing compound, pour the liquid component B into a clean container, then slowly pour out the powdered component A. Using a low-speed mixer, knead the composition for 5 minutes until a homogeneous mass is obtained. Leave the resulting compound for 3 minutes, then re-mix the compound for 2 minutes.


  • Do not apply the compound on chipboard, MDF, plywood, PVC, wooden and metal surfaces.
  • After applying the waterproofing make sure that direct sunlight and precipitation do not fall on the surface, and also do not use the material at temperatures above + 35 ˚С and below + 3 ˚С.
  • After 3 days after applying the waterproofing, tiles or ceramics should be laid or plaster or screed should be applied to protect against all kinds of damage, scratches and bumps.
  • Work should be carried out in compliance with safety and hygiene standards, using a mask and glasses.
  • The tools and equipment used must be washed immediately after use.

1. Where is waterproofing performed?

Waterproofing is used to increase the water resistance of the surface. The waterproofing compound is applied to surfaces such as concrete, brick, plaster and screed.

2. What types of waterproofing are there?

Depending on the type of application, there are penetrating, coating, painting, pasting, injection waterproofing, etc. Depending on the type of water pressure, there are waterproofing compounds to make the surface resistant to positive water pressure and to negative one.

3. How do they make waterproofing in the bathroom?

Waterproofing of the bathroom can be done both with the help of ready-made acrylic mastic, and with the help of polymer cement. For example, for a bathroom, you can use a polymer-cement waterproofing compound Teknomer 200, which is considered a budget, but at the same time a sufficiently high-quality material. 

4. How to make waterproofing of walls?

In order to effectively waterproofing concrete walls, the material should be applied to cleaned and slightly moistened surfaces in 2 layers, while the second one should be applied perpendicular to the previous one. 

5. How to waterproof concrete?

There is a huge selection of various waterproofing materials in the plant chemistry market that need to be selected depending on the tasks and the type of surface. To choose the right waterproofing material, you can call the phone number: 0 800 307 050 and get a free consultation.

Product publications

What kind of waterproofing to use under the screed?
What kind of waterproofing to use under the screed?

Waterproofing is usually applied under the screed in order to prevent the penetration of moisture from the underlying layers into the screed and thus protect the surface from moisture and possible damage.

Read article
What types of waterproofing materials are there
What types of waterproofing materials are there

It is waterproofing works that are one of the main stages in the construction or repair of structures of any type and purpose. There is a huge amount of materials for waterproofing, the types of which we will tell you in our article.

Read article
Are paint and coating waterproofing the same types of waterproofing materials?
Are paint and coating waterproofing the same types of waterproofing materials?

In this article we will talk about paint and coating waterproofing, after reading which you will be able to decide for yourself whether these materials belong to the same type of materials or to different ones.

Read article
What is coating waterproofing?
What is coating waterproofing?

Coating waterproofing is a material that is used to protect concrete surfaces from destruction due to the influence of moisture.

Read article
Liquid waterproofing for concrete: types and features
Liquid waterproofing for concrete: types and features

Liquid waterproofing is a waterproofing material of a liquid consistency, which is applied in a sufficiently thin layer with a brush, roller or sprayer to the surface, protecting it from destruction, while not reducing the space.

Read article