The cement-based waterproofing material gives the surface resistance to negative and positive water pressure
Two component waterproofing material based on an emulsion polymer and special additives
Penetrating waterproofing compound based on an emulsion polymer and special additives, resistant to positive and negative water pressure.
Two component elastic waterproofing compound based on an emulsion polymer and special additives
Crystallized penetrating two-component elastic waterproofing protective mixture.
Two-component elastic waterproofing material with high protection from UV rays.
One component elastic polymer acrylic waterproofing compound
Teknomer 305 is an elastic waterproofing based on elastomeric acrylic resin for waterproofing terraces, balconies, swimming pools and tanks.
Teknomer 305 is an elastic waterproofing based on elastomeric acrylic resin for waterproofing terraces, balconies, swimming pools and tanks.
One component elastic polymer acrylic waterproofing compound, resistant to ultraviolet rays
One-component elastic polymer acrylic waterproofing compound resistant to UV radiation
Two-part epoxy structural adhesive
Teknobond 405 D is a two-component, solvent-free structural epoxy adhesive and repair mortar.
Thermoplastic tape for sealing expansion joints, cracks, joints
Thermoplastic tape for sealing expansion joints, cracks, joints
Thermoplastic tape for sealing expansion joints, cracks, joints
Insulating elastomeric tape with polyester mesh for sealing construction joints
Sealing corner for waterproofing seams, internal.
Sealing corner for waterproofing seams, external.
Transparent two-component waterproofing material based on polyurethane, resistant to ultraviolet light.
One component elastic polyurethane waterproofing compound
One component polyurethane waterproofing compound resistant to UV rays
Two component elastic polyurethane waterproofing compound
Water-based bitumen-rubber primer, used before applying any bitumen waterproofing.
Water-based bitumen-polymer elastic emulsion.
Creates a seamless protective layer on the surface, protecting against groundwater and moisture.
Bitumen-polymer two-component elastic thick-layer water-based waterproofing.
A single-component, modified with new generation hybrid resins, ready-to-use waterproofing material that retains its permanent elastic structure, can be applied to wet surfaces, is resistant to ultraviolet light, and does not contain isocyanates or solvents.
A single-component, modified with new generation hybrid resins, ready-to-use waterproofing material that retains its permanent elastic structure, can be applied to wet surfaces, is resistant to ultraviolet light, and does not contain isocyanates or solvents.
Used for waterproof protection of building structures having contact with a damp environment.
Hydroactive two-component injection material with low viscosity based on polyurethane.
Tekno 1 - This is a ready-to-use liquid additive that increases the water resistance of concrete and mortars.
Liquid waterproofing additive for concrete.
A concrete additive that makes concrete products resistant to positive and negative water pressure
Waterproofing the cord from the hydrophobic resin and chloroprene rubber.
Waterproofing tape of the modified polymers
One-component elastic waterproofing material with UV protection.
One-component waterproofing material based on cement prevents the penetration of water.
Primer based on acrylic dispersion for concrete surfaces for gypsum and plaster
One-component high-viscosity primer based on acrylic emulsion with the addition of quartz sand
A two-component elastic waterproofing compound of blue color, resistant to ultraphyletic rays
Бентонитовый шнур "Гидростоп" 15х25 мм производят из натриевого бентонита, разбухающего под воздействием воды. Бентонит — это природный глинистый минерал, который при контакте с водой набухает и увеличивает свои размеры. В замкнутом пространстве, создает напряжение, понижающее водопроницаемость, даже при наличии трещин и пористых мест в бетоне. Благодаря этому, он является идеальным материалом для надежной гидроизоляции бетонных конструкций.
Bentonite cord "Gidrostop" 10x20 mm is made of sodium bentonite, which swells under the influence of water. Bentonite is a natural clay mineral that swells and increases in size when in contact with water. In a confined space, it creates tension, which reduces water permeability, even in the presence of cracks and porous areas in concrete. Due to this, it is an ideal material for reliable waterproofing of concrete
Bentonite cord "Gidrostop" 5x20 is made of sodium bentonite, which swells under the influence of water. Bentonite is a natural clay mineral that swells and increases in size when in contact with water. In a confined space, it creates tension, which reduces water permeability, even in the presence of cracks and porous areas in concrete. Due to this, it is an ideal material for reliable waterproofing of concrete structures.
Waterproofing bentonite cord "Gidrostop" round 22 mm . During the installation process, a plastic non-removable tube d22 is inserted into the formwork before pouring concrete, which contains a tightening screw for tightening the formwork panels. After unblocking during the potion of the tightening screw from the tube, it is necessary to close the hole. The round bentonite cord is ideal for sealing holes that remain in the concrete, after which the edge is smeared with a waterproofing solution.
Bentonite cord 20x30 mm for waterproofing and sealing construction joints. Bentonite cord "Gidrostop" 20x30 mm is made of sodium bentonite, which swells under the influence of water. Bentonite is a natural clay mineral that swells and increases in size when in contact with water. In a confined space, it creates tension that reduces water permeability, even in the presence of cracks and porous areas in concrete. Due to this, it is the optimal material for reliable waterproofing of concrete structures.
HYDROFLEX 10x20 mm cord is based on acrylic, swells upon contact with water and increases in size. In a confined space, it creates tension, which reduces water permeability, even in the presence of cracks and porous areas in concrete. Due to this, it is an ideal material for reliable waterproofing of concrete structures.
The fastening mesh is designed for reliable fixation of bentonite cord (tow) to a concrete base during waterproofing works.
Bentonite cord "Gidrostop" 20x30 mm is made of sodium bentonite, swelling under the influence of water. Bentonite is a natural clay mineral, which swells and increases its size when in contact with water. In a closed space, it creates tension, reducing water permeability, even in the presence of cracks and porous places in concrete.
Is an elastic-plastic joint sealing tape , which is used to seal joints of reinforced concrete structures.