One-component high-viscosity primer based on acrylic emulsion with the addition of quartz sand
Teknolatex 300 is a one component high-viscosity primer based on an acrylic emulsion with high adhesion and water resistance. Enhances adhesion between glass and ceramic surfaces.
Application areas:
Properties of the primer:
| Colour | White |
| Packaging | Bucket of 3 kg |
| Expiration date | 12 months in a dry environment in a closed package |
| The density of the compound | 1,40 (+ 0.04) kg/l |
| Expenditure | 200-300 g/m2 (1 layer) |
| The life time of the compound | 60 minutes (at a temperature of + 20 °C) |
| Drying time of the layer | 3-5 hours |
| pH | 7-9 |
Notes:
1. Do I need to primer over waterproofing?
The surface should be grooved before applying waterproofing. The primer increases the roughness of the base, providing better adhesion between the surface and waterproofing.
2. When do I need a wall primer?
Primer (primer) it is needed in cases when it is necessary to increase adhesion to the surface, dust it and harden it. Teknolatex 300 is considered a high-quality primer based on an acrylic emulsion. The material is applied with a flow rate of 200-300 g/m2 (in 1 layer).
3. How to understand whether it is necessary to prime the walls?
Since the primer performs a lot of important functions (increasing adhesion, dedusting and hardening of the surface, filling microcracks), the surface can be primed at every stage of finishing.
4. What will happen if the walls are not primed?
Depending on the base and the finish coating, it is determined whether it is necessary to prime the surface with a primer or not. The paint will fall on the walls more evenly and more beautifully after priming the surface, but it is not always necessary to use a primer for finishing with tiles.
5. How to cover the walls with a primer?
The primer should be applied to clean, dry walls with a brush, roller or mechanical spray. Most often, the surface is primed in 1 layer.
Polyurethane waterproofing is a type of waterproofing coating that is used to protect surfaces from moisture and water. It is made on the basis of polyurethane resins, which form a strong and flexible film when applied to the surface.
Read article
If you plan to make repairs yourself, but are not a professional craftsman, it is better to purchase acrylic waterproofing.
Read article
Liquid waterproofing is a waterproofing material of a liquid consistency, which is applied in a sufficiently thin layer with a brush, roller or sprayer to the surface, protecting it from destruction, while not reducing the space.
Read article
Waterproofing tape – adhesive tape is designed to seal various types of seams.
Read article
