13 Dec 2022
Choosing paint for parking lots
Teknobond 950 is a high-quality paint for creating markings on asphalt and concrete roads, as well as parking lots.
Read articlePaint for road markings Teknobond 950(Текнобонд 950)
One component paint for road markings
Teknobond 950 is a one component paint for road markings and floor coverings based on acrylic resin and mortar.
Areas of application:
- Highways, highways, urban road surface
- Airports, bridges
- Shopping malls, parking lots, industrial facilities
- Sidewalks, curbs, paving stones
- It is used on asphalt and concrete surfaces in all types of engineering structures
Paint Properties:
- Easy to use
- Quick-drying, even when applied in a thick layer
- Wear-resistant
- Resistant to UV radiation
- The color of the paint does not change regardless of the application surface.
- Reflective
| Colour | Yellow, white, red (any to order) |
| Packaging | Metal bucket 25 kg |
| Expiration date | 12 months in the closed original packaging |
| Density | 1,65 ±0,05 g/ml |
| Expenditure | 150±5 g/m2 (when applied in 1 layer) |
| Life time of the compound | ~ 60 minutes |
| Viscosity | ~ 120 sec (DIN CUP No. 4 DIN 53211) |
| Grasping | 10-15 minutes |
| Dust resistance | 20-30 minutes |
| Complete drying | ~ 3 hours |
| Application temperature | +5 °C - +35 °C |
- Before applying the material, clean the surface from any types of oil, rust, detergents, dirt and other substances that prevent setting. The recommended tensile strength is from 1.5 N/mm2.
- If there are cracks or voids on the concrete or asphalt surface, they should be repaired beforehand.
- Mix the paint well before use.
- The paint is applied in one layer, but if necessary, the application of the material in 2 layers, the interval between the layers is 1 hour. It is applied with a brush, roller or a special device for marking road paint.
Notes:
- In no case should the paint penetrate into the sewers or drains.
- After partial use, the paint container must be tightly closed.
- Do not use paint in the rain.
- Do not dilute the paint with water.
- After applying the paint, the surface should be protected from adverse weather conditions, such as direct sunlight, strong wind, high air temperature (above +35 °C), rain and frost.
- The tools and equipment used should be cleaned immediately after use.
1. How do they make markings on the road?
Road markings are made with a special paint for road markings, for example, Teknobond 950 based on acrylic resin and solvent.
2. When are the markings applied on the road?
Marking on the road is applied in dry weather at plus air temperature, but not above +35 ° C.
3. What types of road markings are there?
There are about 5 types of road markings. Regardless of the type of marking, the main thing is to choose a high-quality paint and apply it correctly to the surface.
4. How are the markings applied to the road?
Paint for road markings should be applied in 1 or 2 layers, mixed well before use. The interval between the first and second layer is 1 hour. Teknobond 950 paint is one-component, which further simplifies the work.
5. How to remove markings on the road?
There are several ways to remove paint on the road: mechanically (using a special technique) and with water under high pressure (in this way you can erase older paint).
Product publications
01 Dec 2022
How to make markings on asphalt?
Markings on asphalt, as well as markings on concrete, are drawn with special high-quality paints designed to create wear-resistant and durable road markings
Read article
29 Nov 2022
How to apply road marking paint correctly
For example, using Teknobond 960, the layer is grasped in an average of 15 minutes.
Read article
15 Nov 2022
How do they draw road markings?
We recommend using Tekno's road marking paint called Teknobond 950. It is a reflective, wear-resistant and quick-drying paint.
Read article
10 May 2022
What kind of impregnation for concrete to use for industrial floors
The industrial floor must be resistant to the negative effects of moisture, chemicals, must protect the reinforced concrete structure from mechanical influences, temperature changes.
Read article
