Paint for road markings Teknobond 960 white(Текнобонд 960)

Products > Materials for industrial floors

Paint for road markings Teknobond 960 white(Текнобонд 960)

Road "cold" paint for asphalt and concrete based on synthetic resin and solvent

272
uah
x
kg
=
272 uah
CHECKOUT

Введите свои данные

Teknobond 960 is a cold road paint for asphalt and concrete based on synthetic resin and solvent.
Areas of application:

  • Highways, motorways, public roads
  • Airports, bridges
  • Residential buildings, shopping malls, municipal buildings
  • Sidewalks, curbs, paving stones
  • It is used on asphalt and concrete in all types of engineering structures

Paint Properties:

  • Suitable for "cold" applications
  • Quick-drying, even when applied in a thick layer
  • Wear-resistant
  • Resistant to UV radiation
  • The color of the paint does not change regardless of the application surface
  • Reflective
Chemical structure Based on synthetic resin and solvent
Colour White
Density 1,70±0,05 kg/l
Packaging 25 kg
Expiration date 12 months in the closed original packaging
Expenditure 150± 5 g/m2 (with one layer of application)
Life time of the compound ~ 25 minutes
Grasping ~15 minutes
Resistance to the influence of dust ~ 40 minutes (23 °C)
Full cure ~ 3.5 hours (23 °C)
Application temperature +5 - +35 °C
  • Before applying the material, clean the surface from any types of oil, rust, detergents, dirt and other substances that prevent setting. The recommended tensile strength is from 1.5 N/mm2.
  • If there are cracks or voids on the concrete or asphalt surface, they should be repaired beforehand.
  • The paint is applied in one layer, but if necessary, the application of the material in 2 layers - the second should be applied after 1 hour. It is applied with a brush, roller or a special device for marking road paint.
  • If necessary, you can dilute the paint with Tekno solvent in an amount of 5-8 % by volume / weight of the paint and apply it using a mechanical sprayer. Between the layers, you need to pause for 15 minutes.

Notes:

  • In no case should the paint penetrate into the sewers or drains.
  • After partial use, the paint container must be tightly closed.
  • Do not use paint in the rain.
  • Do not dilute the paint with water.
  • After applying the paint, the surface should be protected from adverse weather conditions, such as direct sunlight, strong wind, high air temperature (above 35 °C), rain and frost.
  • The tools and equipment used should be cleaned immediately after use.

Product publications

What paint is used to paint a zebra?
What paint is used to paint a zebra?

Road paint must be resistant to traffic so that the markings remain clear and visible for a long time

Read article
What materials are used for road markings?
What materials are used for road markings?

Synthetic resin based paints are a hardwearing and durable material that is also used on asphalt and concrete surfaces, but provides high-quality indelible markings.

Read article
Super resistant paint for environments with aggressive environments
Super resistant paint for environments with aggressive environments

The paint must be super resistant and contain special chemical additives that make the material suitable for aggressive room conditions.

Read article
What are road markings?
What are road markings?

For marking lines on the road, paint is used that has high visibility and wear resistance.

Read article
What paint to choose for parking lot markings?
What paint to choose for parking lot markings?

Paint for parking must be super resistant and resistant to the influence of many types of environmental destroyers, such as moisture, chemical.

Read article
How can I wash off the paint for road markings?
How can I wash off the paint for road markings?

Therefore, if you do not want to risk getting stains or scratches on your transport, it is better to give it to a car service, where an experienced master will carefully remove the necessary layer of paint with a special abrasive.

Read article
What kind of paint is used to mark the road?
What kind of paint is used to mark the road?

High-quality paint for road markings should last at least 2 years.

Read article
How to make markings on asphalt?
How to make markings on asphalt?

Markings on asphalt, as well as markings on concrete, are drawn with special high-quality paints designed to create wear-resistant and durable road markings

Read article
How to apply road marking paint correctly
How to apply road marking paint correctly

For example, using Teknobond 960, the layer is grasped in an average of 15 minutes.

Read article