Bentonite cord for waterproofing and sealing construction joints 15x25 mm, red color, 5 m.p.

Products > Waterproofing materials

Bentonite cord for waterproofing and sealing construction joints 15x25 mm, red color, 5 m.p.

Бентонитовый шнур "Гидростоп" 15х25 мм производят из натриевого бентонита, разбухающего под воздействием воды. Бентонит — это природный глинистый минерал, который при контакте с водой набухает и увеличивает свои размеры. В замкнутом пространстве, создает напряжение, понижающее водопроницаемость, даже при наличии трещин и пористых мест в бетоне. Благодаря этому, он является идеальным материалом для надежной гидроизоляции бетонных конструкций.

980
uah
x
pc.
=
980 uah
CHECKOUT

Введите свои данные

Bentonite cord "Gidrostop" 15x25 mm  is made of sodium bentonite, which swells under the influence of water. Bentonite is a natural clay mineral that swells and increases in size when in contact with water. In a confined space, it creates tension that reduces water permeability, even in the presence of cracks and porous areas in concrete. Due to this, it is an ideal material for reliable waterproofing of concrete structures. Excellent technological performance and a simple installation method make it possible to use the product as an insulating material for joints in underground construction, on hydraulic structures and in civil engineering.

Application:

  • intended for waterproofing joints or eliminating leaks in concrete structures (basements, swimming pools, pipe connections, sewage systems, etc.), forming a flexible and elastic gasket or flexible seal in a joint or crack;
  • waterproofs temporary window openings in non-residential basements, ventilation holes,
  • used in all repair and reconstruction works of buildings and structures (in all cases when concreting is carried out and when waterproofing of joints and connections is required). 
  • used in water and sewer passages, underground parts of construction sites, as well as in houses and structures built below the groundwater level.

Advantage:

  • low cost
  • easy installation (does not require highly qualified installers and special tools)
  • wide range of operating temperatures without loss of properties -30°C to 50°C.
  • installation on wet substrates possible
  • plasticity
  • withstands hydrostatic pressure up to 7 atmospheres.

 

 
Density, g/cm3 1,5
Color Red
Packaging rolls of 5 m
Boxes 40 m (8 rolls)
Flexibility on a beam with radius R 25 mm
at a temperature of minus 30 ° C no cracks
at a temperature of plus 50 ° C no cracks
Volumetric expansion after exposure to water, % - after 24 hours: 25
- after 48 hours: 80
- after 7 days: 210
Breaking force during stretching, N, not less 18
Elongation at break, % not less than 25