Hydrophobic additive for concrete and mortars Tekno 1, 30 kg
Liquid waterproofing additive for concrete.
1986 uah
x
canister
=
1986 uah
Tekno 1 is a liquid waterproofing additive for concrete.
Applications:
- when pouring foundations and walls
- when filling pools and reservoirs
- a large engineering objects (dams, subways, highways)
Advantages:
- ready-to-use, economical
- does not contain chlorine does not cause corrosion
- permeable
|
Appearance |
Yellow liquid |
|
Shelf life |
12 months in closed original container |
|
Packaging |
10 kg, 30 kg canister |
|
Application temperature |
(+5°C) - (+35°C) |
|
Ratio to the mass of cement in the solution |
2-3 % |
|
Density |
1.05 kg/l |
| MAIN CHARACTERISTICS | |
|---|---|
| Manufacturer | Tekno Construction Chemicals |
| Country of manufacture | Turkey |
| Type of additive | Hydrophobic agent |
| State of additive | Liquid |
| Type of use | Universal |
| Application of additive | For screeds, For concrete, For masonry, For plaster, For putty |
| Density | 1.05 g/cm3 |
| Minimum temperature for work | 5 degrees |
| Maximum temperature for work | 35 degrees |
| Minimum operating temperature | 5 degrees |
| Maximum operating temperature | 35 degrees |
| Packaging | Canister |
| Material packaging (kg) | 10 |
| Material packaging (l) | 10 |
| Color | Yellow |
Notes on application:
- for mixing water used in the ratio 1:10
- if you are using observe of safety and labour protection
- after application the surface should be protected from direct sunlight, strong wind, high air temperature (above 35° C), rain and frost
