Acrylic elastic waterproofing resistant to UV radiation for balconies and terraces, swimming pools, tanks Teknomer 305, 20 kg

Products > Waterproofing materials

Acrylic elastic waterproofing resistant to UV radiation for balconies and terraces, swimming pools, tanks Teknomer 305, 20 kg

Teknomer 305 is an elastic waterproofing based on elastomeric acrylic resin for waterproofing terraces, balconies, swimming pools and tanks.

3396
uah
x
bucket
=
3396 uah
CHECKOUT

Введите свои данные

Teknomer 305 is an elastic waterproofing based on elastomeric acrylic resin for waterproofing terraces, balconies, swimming pools and tanks.

Application:

- Swimming pools and water tanks

- Kitchens, baths and showers, laundries and toilets

- External walls of silos and warehouses

- Suitable for any mineral substrates (concrete, plaster, aerated concrete, brick)

- Waterproofing on plasterboard, OSB, polyurethane foam, galvanized metal

- Can be used in combination with thermal insulation materials

- To create a moisture-proof layer under tile materials

- To create waterproofing before laying floor coverings (wood, plastic, linoleum)

Advantages:

- Ready to use

- Resistant to UV radiation

- Protects surfaces from carbonization

- High impact resistance

- High resistance to moisture penetration

- For use inside and outside buildings

- Solvent-free, non-toxic

- Creates a durable protective membrane on the application surface

- High resistance to cracking

Instructions for use:

The surface must be flat, free from dust, dirt, oils and other substances. If there are cracks or potholes on the surface, they must be closed using the appropriate Teknorep repair mixtures. After repairing the surface, the mastic should be applied no earlier than 72 hours. Mix before use. To use Teknomer 300EX as a primer, it is necessary to dilute the material with water in a ratio of 1:1. The material must be applied using a brush, roller or sprayer, each subsequent layer should be applied perpendicular to the previous one. To obtain absolute protection against moisture, it is recommended to glue all joints and corners with waterproofing tape.

Notes on use/Limitations:

Follow safety and labor protection techniques during work. Use protective gloves, clothing, glasses. In case of contact with skin, wash with plenty of water and soap. In case of contact with eyes, rinse with plenty of water and consult a doctor.

Parameter Value
Composition Acrylic mastic on a water basis
Color White
Packaging 20 kg bucket
Crack bridging ability Up to 2.5 mm
Interval between layers 5 hours
Consumption (waterproofing) 1.53 kg/m² (for a finished layer of 1 mm thickness)
Full waterproofing 7 days
Application temperature From +5 °C to +35 °C
Operating temperature From -25 °C to +80 °C
Elasticity 200%