UV-resistant waterproofing Teknomer 600 1K UV (Текномер 600 1K UV)

• Before applying the material, the surface should be cleaned of any types of oil, rust, detergents, dirt and other substances that prevent setting.
• If there are cracks or other damages on the surface, they must be previously repaired with Teknorep. Use Tekomer 600 1K UV 3-4 days after surface repair.
• Before using Teknomer 600 1K UV joints should be worked with Teknomer pah bandi insulation tape.
• All gutters, drains and filters should also be insulated with an insulating tape.
• Next, apply Teknobond 300 epoxy primer with a brush or roller, the consumption of which is 0.200-0.400 kg/m².  Consumption depends on the quality and absorbency of concrete. You should wait until the primer dries (from 4 to 24 hours) and you can start applying Teknomer 600 1K UV.
• The material can be applied with a brush with stiff bristles, roller or spray in two layers, and the second layer should be applied perpendicular to the previous one.  After applying the layer, you should wait at least 1 hour before applying the next one. The layer is considered dried when it ceases to be imprinted on the fingers.

Notes:

• Do not use Teknomer 600 1K UV during rain.
• After applying the primer, make sure that direct sunlight and precipitation do not fall on the surface, and also do not use the material at temperatures above + 35 ˚С and below + 3 ˚С.
• Work should be carried out in compliance with safety and hygiene standards, using a mask and glasses.
• The tools and equipment used must be washed immediately after use.
• Do not apply Teknomer 600 1K UV during rain.

1. What is polyurethane waterproofing?

Polyurethane waterproofing is a ready-to-use elastic waterproofing mastic that protects terraces, roofs, balconies, gutters and foundations of buildings from moisture. Some polyurethane mastics are UV-resistant, 

2. How to waterproofing the terrace?

For waterproofing the terrace, it is necessary to select elastic materials that are resistant to ultraviolet rays, for example, Teknomer 600 1K UV. Commissioning of the terrace is possible as early as 16-24 hours after the waterproofing is applied.

3. What kind of waterproofing should I choose for the balcony?

Waterproofing the balcony is best with penetrating or coating waterproofing. From the coating it is recommended to pay attention to polymer mastics, the average consumption of which is 1.20-1.50 kg/m². 

4. How to cover the floor on an open balcony?

The floor on the open balcony must be waterproofing. There are several ways to protect an open balcony from moisture, but one of the best is waterproofing with Teknomer 600 1K UV polyurethane waterproofing in 2 layers. It is very convenient to work with the material, since it is ready for application, and the second layer can be applied after 1-2 hours.

5. How much does the waterproofing of the balcony cost?

The cost of waterproofing the balcony varies from 200 UAH to 500 UAH for 1 m². When using Teknomer 600 1K UV polyurethane mastic in white, you can save on the finishing coating, since the material is resistant to UV rays and it can not be covered.