Polyurethane sealant for joints Teknopoliderz 1K(Текнополидерз 1K)
One component polyurethane flex moisture-resistant sealant for horizontal and vertical joints
Airfield joint sealant Teknopoliderz 2K(Текнополидерз 2K)
Two component polyurethane self-leveling elastomeric modified tar sealant for joints
Aerodromic thixotropic sealant Teknopoliderz 2K TIX(Текнополидерз 2K ТИКС)
Teknopoliderz 2K TIX is a three-component thixotropic elastomeric elastomeric polyurethane bitumen-modified polyurethane joint sealant that provides waterproofing between concrete elements.
Sealing cord made of polyethylene foam for sealing joints
Tape with a diameter of 0.6 mm to 60 mm is made of high quality polyethylene foam. The tourniquet is used to fill expansion joints when installing industrial floors. It has excellent water-repellent and heat-insulating characteristics, easy to install, environmentally friendly. It has a cylindrical shape. It is used as a sealant in window constructions, to fill seams, joints
Two-component polyurethane sealant OKSIPLASTS(12 кг)
Two-component sealing mastic contributes to the high resistance of the sealing surface to deformations, temperature changes, aggressive environments, ultraviolet radiation and other negative influences. In addition, the material retains elasticity and other useful properties.
One-component sealant for roofing based on MS Polymer Tenalux 112M
Ready-to-use, one-component sealant based on MS Polymer for sealing joints and cracks in vertical and inclined building structures. Easy to apply manually by spraying using special guns. Can be used to seal joints in horizontal structures in the absence of mechanical stress. Cures due to chemical reaction with air moisture. The sealant has excellent adhesion to basic building materials, as well as good strength and deformation properties after hardening. Can be used in residential premises.
One-component sealant for building structures based on MS Polymer Tenalux 131M
Ready-to-use, one-component sealant based on MS-Polymer for sealing joints in horizontal and vertical structures with direct mechanical load. Easy to apply manually by spraying using special guns. Cures due to a chemical reaction with air moisture. The sealant has excellent adhesion to most building materials, as well as good strength and deformation properties after hardening. Suitable for a variety of sealing and bonding tasks. Can be used outside and inside buildings, including residential premises.
Sealant for external window installation PROFFLEX A 600 ml
Profflex A is used in the construction and repair of residential, industrial buildings and structures, as well as in individual housing construction and repair. It has a pasty consistency, hardens due to the evaporation of water, forming a rubber-like material.
Sealant for external window installation PROFFLEX A 7 kg
Profflex A is used in the construction and repair of residential, industrial buildings and structures, as well as in individual housing construction and repair. It has a pasty consistency, hardens due to the evaporation of water, forming a rubber-like material.
Sealant for internal window installation PROFFLEX B 600 ml
PROFFLEX B - one-component acrylate sealant with high vapor barrier properties. The sealant is intended for performing the inner layer of the assembly joint in accordance with DSTU-N B V.2.6-146:2010, with an allowable deformation of the assembly joint of no more than 15%, for sealing the inner contour of window, door and balcony structures.
Tenax Profflex B one-component acrylic sealant for interior use 7 kg, White
PROFFLEX B - one-component acrylate sealant with high vapor barrier properties. The sealant is intended for performing the inner layer of the assembly joint in accordance with DSTU-N B V.2.6-146:2010, with an allowable deformation of the assembly joint of no more than 15%, for sealing the inner contour of window, door and balcony structures.
Proflex PU40 elastic one-component sealant for construction joints based on polyurethane
Profflex PU40 is a high-quality, elastic, one-component sealant for construction joints based on polyurethane.
Polymeric sealant adhesive Hydroflex 40 MS 600 ml. Gray
Is a universal general purpose adhesive sealant based on AST polymer. It combines the properties of both silicone and polyurethane, making it the optimal choice for a variety of materials, including: aluminum, granite, ceramics, marble, porcelain, metals, PVC, glass, wood, porous surfaces (concrete, brick, limestone, etc.).
Tenalux 111M MS polymer-based construction joint sealant (class 20HM)
Tenalux 111M is a ready-to-use MS Polymer-based sealant for filling joints and cracks in vertical and inclined building structures.